2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

AXLE COMPONENTS
RING GEAR AND PINION SETS 9"
SHORT TRACK AND ROAD COURSE
PART NUMBER
RATIO
M-4209-N511 5.11
M-4209-N514 5.14
M-4209-N525 5.25
M-4209-N533 5.33
M-4209-N543 5.43
M-4209-N550 5.50
PART NUMBER
RATIO
M-4209-N557 5.57
M-4209-N567 5.67
M-4209-P614 6.14
M-4209-P620 6.20
M-4209-P633 6.33
M-4209-P643 6.43
Ford Racing’s famous, race-proven 9" Ring Gear and Pinion sets are engineered,
developed, manufactured and tested for maximum performance. They are CNC
lapped and developed with an optimal racing pattern. Their premium quality
features make them the first choice on the NASCAR circuit. Ring gears upgraded
to SAE 8620 steel and factory back-cut for up to 2 lbs. weight savings.
SHIM NOTE: Ford Racing 9" ring gear and pinion sets do not come
with pinion depth shims. Order M-4663-A201 Shim Kit
or M-4663-A100 Small Parts Kit as necessary.
They are described on page 137.
9" AXLE HOUSING KIT
M-4330-B
• Engineered with the latest CAD/CAM
technology
• Precision manufactured using laser cutting,
CNC machining and robotic fabrication for
accuracy never before possible
• Constructed from High Form 50 (A-715-50)
material for 38% greater strength over 1010
• 4 internal gussets provide added support for
axle tubes and cross bracing to eliminate
deflection
• 1" wide .25" thick continuous ring flange adds
to structural stability
• 7" deep tube sockets assure precise
positioning and critical alignment for popular
3" axle tubes
• Approved by NASCAR
• These 8-piece kits are only sold in sets of 50
“DAYTONA” PINION
BEARING RETAINER
M-4614-A High strength aluminum (206T6)
M-4614-B Nodular Iron
Both pinion bearing retainers are a direct fit and
functional replacement for the C3AZ-4614-B unit,
which is no longer serviced by Ford Customer
Service Division. Each comes complete with large
rear cup (TBAA-4616-A) or (HM89410) and small
front cup (B7A-4614-A) or (M88010).
NOTE: Use large rear
bearing TBAA-4621-A
(HM-89443) and
small front bearing
B7A-4621-A
(M-88048) with
these retainers.
NASCAR BEARING
SUPPORT
M-4614-BR
Race prepared “Daytona”
pinion bearing retainer.
Deburred and prepped
for build up of your
9" carrier assembly.
UNIVERSAL PINION NUT
M-4213-A Sold in pkg. of 100
• Universal-design 3/4-20 hex flange
pinion lock nut
• Fits 6.75", 7.5",
8.8" and 9"
axle assemblies
COMPANION FLANGE
M-4851-A
• Heavy-duty “short” 1330 Series
companion flange
• Accepts 1.0625" U-joint bearing caps
• Balanced to 0.25 oz.-in.
• Replaces C3SZ-4851-A, which is no
longer serviced
NOTE: The front
counter-bore must
be machined 0.25"
deeper if used with
M-4614-A or -B
pinion bearing
retainers.
9" CARRIER
GASKET
M-4035-A Paper Gasket
(Sold in pkg. of 20)
9" CARRIER
GASKETS
M-4211-B Reusable
Rubber Gasket
(Sold separately)
• Replace paper gaskets and
messy silicone with this reusable
gasket. No more scraping!
• Use for changing ring and pinion
gear or differential
SPECIAL U-JOINT
KIT
M-4635-A
• Kit consists of a hybrid 1310/
1330 series cross, plus 4
1.0625" OD and 2 1.125" OD
caps and locking clips
• Allows small and large Ford
drivetrain components to
be interchanged
“BENDA” PINION
SEAL (9" AXLE)
M-4676-A111
This premium Viton oil seal was
developed for high speed, high
temperature applications by Dave
Benda, Materials Control
Supervisor, Ford Sterling Plant.
138 Tech “Hot Line” (586) 468-1356 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.