Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
High beams/<br />
roadside parking lamps<br />
1 High beams<br />
2 Headlamp flasher<br />
3 Roadside parking lamps<br />
Roadside parking lamps, left or right*<br />
You also enjoy the option of lighting up just one<br />
side of your vehicle when parking.<br />
Switching on<br />
After parking the vehicle, press the lever up or<br />
down beyond the resistance point <strong>for</strong> approx.<br />
1 second, arrow 3.<br />
The roadside parking lamps drain the battery.<br />
Do <strong>no</strong>t leave them switched on <strong>for</strong><br />
long periods of time, otherwise it may <strong>no</strong> longer<br />
be possible to start the engine.<<br />
Switching off<br />
Briefly press the lever in the opposite direction<br />
up to the resistance point, arrow 3.<br />
High-beam Assistant*<br />
The concept<br />
This system automatically switches the high<br />
beams on and off again. The process is controlled<br />
by a sensor on the front side of the interior<br />
rearview mirror. The Assistant makes sure<br />
that the high beams are switched on whenever<br />
the traffic situation permits. This relieves you of<br />
eyestrain and at the same time offers you the<br />
best possible visibility. Naturally, you can intervene<br />
at any time and switch the high beams on<br />
and off as usual.<br />
Activating system<br />
1. Turn the light switch to position 3, refer to<br />
page 111.<br />
2. With the low beams on, briefly press the<br />
turn signal lever toward the high-beam setting.<br />
The indicator lamp in the instrument<br />
panel lights up when the high-beam<br />
assistant is activated. The system<br />
automatically switches the high beams on and<br />
off, reacting <strong>no</strong>t only to oncoming traffic and<br />
traffic ahead, but also to sufficient illumination,<br />
e.g. in built-up areas.<br />
Switching high beams on and off<br />
manually<br />
If you wish or the situation requires it, you can<br />
intervene at any time:<br />
> If the high-beam assistant has switched on<br />
the high beams, but you want to use low<br />
beams, simply switch them on using the<br />
turn signal lever. This deactivates the highbeam<br />
assistant.<br />
To reactivate the system, briefly press the<br />
turn signal lever toward the high-beam<br />
position.<br />
> If the high-beam assistant has switched on<br />
the low beams, but you want to use high<br />
beams, simply switch them on in the usual<br />
way. This deactivates the system and you<br />
must switch to low beams manually.<br />
To reactivate the system, briefly press the<br />
turn signal lever toward the high-beam<br />
position.<br />
113<br />
Reference Mobility<br />
Communications Entertainment Navigation Driving tips Controls<br />
At a glance