31.12.2014 Views

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Raising, opening, closing<br />

Raising<br />

Press the switch.<br />

The closed sunroof is tilted and the sliding visor<br />

opens slightly.<br />

Do <strong>no</strong>t use <strong>for</strong>ce to close the sliding visor<br />

with the glass sunroof in its raised position,<br />

otherwise the mechanism will be damaged.<<br />

Opening, closing<br />

Sliding visor<br />

You can move the sliding visor independently<br />

with the sunroof closed or raised.<br />

> Slide the switch back to the resistance<br />

point.<br />

The sliding visor opens as long as you keep<br />

the switch in this position.<br />

> Briefly press the switch back beyond the<br />

resistance point.<br />

The sliding visor will open automatically.<br />

Briefly pressing the switch stops the<br />

motion.<br />

You can close the sliding visor in a similar manner<br />

by sliding the switch <strong>for</strong>wards.<br />

Pa<strong>no</strong>ramic glass sunroof<br />

With the sliding visor open, proceed as<br />

described under Sliding visor.<br />

For in<strong>for</strong>mation on using convenient opening<br />

and closing at the door lock or with the remote<br />

control, refer to page 28 or 29.<br />

For in<strong>for</strong>mation on convenient closing with<br />

Com<strong>for</strong>t Access, refer to page 36.<br />

Opening and closing sunroof and<br />

sliding visor together<br />

Briefly press the switch beyond the resistance<br />

point twice consecutively.<br />

Briefly pressing the switch stops the motion.<br />

Com<strong>for</strong>t mode<br />

> Press the switch twice with the sunroof<br />

open:<br />

The sunroof is raised.<br />

> When the sunroof is raised, briefly press the<br />

switch twice in the opening direction:<br />

The sunroof is opened all the way.<br />

Com<strong>for</strong>t position<br />

In the com<strong>for</strong>t position, the sunroof is <strong>no</strong>t completely<br />

open; this reduces wind <strong>no</strong>ise in the<br />

passenger compartment.<br />

Each time the pa<strong>no</strong>ramic glass sunroof is completely<br />

opened or closed, it stops in the com<strong>for</strong>t<br />

position. If desired, continue the motion following<br />

this with the switch.<br />

After switching off ignition<br />

You can still operate the roof <strong>for</strong> approx.<br />

1 minute, as long as <strong>no</strong> door has been opened.<br />

Pinch protection system<br />

If the pa<strong>no</strong>ramic glass sunroof or sliding visor<br />

encounter resistance when closing from<br />

roughly one third of the sunroof opening or<br />

when closing from the raised position, the closing<br />

action is interrupted and the pa<strong>no</strong>ramic<br />

glass sunroof and sliding visor reopen a little.<br />

Despite the pinch protection system,<br />

inspect the sunroof's travel path prior to<br />

closing it, as the safety system might fail to<br />

detect certain kinds of obstructions, such as<br />

very thin objects, and the sunroof would continue<br />

closing.<<br />

Closing without pinch protection<br />

system<br />

In case of danger from outside, slide the switch<br />

<strong>for</strong>ward beyond the resistance point and hold.<br />

39<br />

Reference Mobility<br />

Communications Entertainment Navigation Driving tips Controls<br />

At a glance

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!