Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG

Adjusting
Rear
1. Press the button 1.
2. Select "Seat heating distribution" and
press the controller.
Operation similar to front seat heating; without
temperature distribution.
Active seat ventilation* and
seat heating*
Front
3. Turn the controller to adjust the distribution.
The setting is applied.
Temperature distribution with active
seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
1. Press button 1.
2. Select "Seat heating distribution" and
press the controller.
1 Seat heating
2 Active seat ventilation
Press button 1 or 2 once depending on the
temperature or ventilation position. The LED in
the respective button lights up.
The temperature and ventilation levels are displayed
in bar form on the Control Display. A display
of three bars indicates the highest level of
seat heating or seat ventilation.
The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: press button 1 or 2 longer.
Temperature distribution without
active seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
3. Turn the controller to adjust the distribution.
The setting is applied.
Heated rear seats
Operation similar to front seat heating; without
temperature distribution, refer to page 49.
50