FortiGate IPSec VPN User Guide - FirewallShop.com

More documents

Recommendations

Info

Redundant route-based VPN configuration example Redundant VPN configurations Name Phase 1 Route_B. Site_1_B 4 Select Create Phase 2, enter the following information and select OK: Name Phase 1 Route_C. Site_1_C 5 Select Create Phase 2, enter the following information and select OK: Name Phase 1 Route_D. Site_1_D To configure routes 1 Go to Router > Static. 2 Select Create New, enter the following default gateway information and then select OK: Destination IP/Mask 0.0.0.0/0.0.0.0 Device WAN1 Gateway 10.10.10.1 Distance 10 3 Select Create New, enter the following information and then select OK: Destination IP/Mask 192.168.22.0/255.255.255.0 Device Site_1_A Distance 1 4 Select Create New, enter the following information and then select OK: Destination IP/Mask 192.168.22.0/255.255.255.0 Device Site_1_B Distance 2 5 Select Create New, enter the following information and then select OK: Destination IP/Mask 192.168.22.0/255.255.255.0 Device Site_1_C Distance 3 6 Select Create New, enter the following information and then select OK: Destination IP/Mask 192.168.22.0/255.255.255.0 Device Site_1_D Distance 4 FortiGate IPSec VPN Version 3.0 User Guide 90 01-30005-0065-20070716
Redundant VPN configurations Redundant route-based VPN configuration example To configure firewall policies 1 Go to Firewall > Policy. 2 Select Create New, enter the following information, and select OK: Source Interface/Zone Source Address Name Destination Interface/Zone Destination Address Name Schedule Service Action Internal All Site_1_A All Always Any ACCEPT 3 Select Create New, enter the following information, and select OK: Source Interface/Zone Source Address Name Destination Interface/Zone Destination Address Name Schedule Service Action Site_1_A All Internal All Always Any ACCEPT 4 Select Create New, enter the following information, and select OK: Source Interface/Zone Source Address Name Destination Interface/Zone Destination Address Name Schedule Service Action Internal All Site_1_B All Always Any ACCEPT 5 Select Create New, enter the following information, and select OK: Source Interface/Zone Source Address Name Destination Interface/Zone Destination Address Name Schedule Service Action Site_1_B All Internal All Always Any ACCEPT 6 Select Create New, enter the following information, and select OK: Source Interface/Zone Source Address Name Destination Interface/Zone Destination Address Name Schedule Internal All Site_1_C All Always FortiGate IPSec VPN Version 3.0 User Guide 01-30005-0065-20070716 91
Page 1 and 2:
USER GUIDE FortiGate IPSec VPN Vers
Page 3 and 4:
Contents Contents Introduction ....
Page 5 and 6:
Contents Adding XAuth authenticatio
Page 7 and 8:
Contents Defining IKE negotiation p
Page 9 and 10:
Introduction About FortiGate IPSec
Page 11 and 12:
Introduction About this document
Page 13 and 14:
Introduction Fortinet documentation
Page 15 and 16:
Configuring IPSec VPNs IPSec VPN ov
Page 17 and 18:
Configuring IPSec VPNs General prep
Page 19 and 20:
Gateway-to-gateway configurations C
Page 21 and 22:
Gateway-to-gateway configurations G
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Gateway-to-gateway configurations H
Page 31 and 32:
Gateway-to-gateway configurations H
Page 33 and 34:
Hub-and-spoke configurations Config
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: Hub-and-spoke configurations Config
Page 41 and 42: Hub-and-spoke configurations Config
Page 43 and 44: Hub-and-spoke configurations Dynami
Page 49 and 50: Dynamic DNS configurations Configur
Page 55 and 56: FortiClient dialup-client configura
Page 71 and 72: FortiGate dialup-client configurati
Page 79 and 80: Internet-browsing configuration Con
Page 81 and 82: Internet-browsing configuration Rou
Page 83 and 84: Redundant VPN configurations Config
Page 85 and 86: Redundant VPN configurations Config
Page 87 and 88: Redundant VPN configurations Redund
Page 89: Redundant VPN configurations Redund
Page 99 and 100: Redundant VPN configurations Partia
Page 105 and 106: Transparent mode VPNs Configuration
Page 107 and 108: Transparent mode VPNs Configuration
Page 109 and 110: Transparent mode VPNs Configure the
Page 111 and 112: Manual-key configurations Configura
Page 113 and 114: Manual-key configurations Specify t
Page 115 and 116: IPv6 IPSec VPNs Overview of IPv6 IP
Page 117 and 118: IPv6 IPSec VPNs Site-to-site IPv6 o
Page 127 and 128: Auto Key phase 1 parameters Overvie
Page 129 and 130: Auto Key phase 1 parameters Authent
Page 137 and 138: Auto Key phase 1 parameters Definin
Page 139 and 140: Auto Key phase 1 parameters Definin
Page 141 and 142:
Auto Key phase 1 parameters Using X
Page 143 and 144:
Phase 2 parameters Basic phase 2 se
Page 145:
Phase 2 parameters Advanced phase 2
Page 148 and 149:
Configure the phase 2 parameters Ph
Page 150 and 151:
Defining firewall policies Defining
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Monitoring VPN connections Monitori
Page 158 and 159:
Logging VPN events Monitoring and t
Page 160 and 161:
VPN troubleshooting tips Monitoring
Page 162 and 163:
Index Encryption Algorithm, Manual
Page 164 and 165:
Index remote peer authenticating wi
Page 166:
www.fortinet.com
show all

FortiGate IPSec VPN User Guide - FirewallShop.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?