12.04.2015 Views

Annual Report 2011-2012

Annual Report 2011-2012

Annual Report 2011-2012

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Annual</strong> Research <strong>Report</strong> <strong>2011</strong>-<strong>2012</strong><br />

Product Title:<br />

Teleprotection System for Digital Communication Networks<br />

type DTPS-8C<br />

Department: tele-communication<br />

Research Center: Power Systems Control & Dispatching<br />

Producer: Peimann Khotoot Gostar Company<br />

Introduction- Definition- General Information:<br />

Safe and uninterrupted power is feasible with the widespread use of control and<br />

protective equipment and protective equipment has a main role in preventing power<br />

outage and blackout. High voltage networks, transmission lines, bus bars, power<br />

transformers and so on are mainly install and work in the outdoor and they are exposed<br />

to natural disasters. Therefore, they should be protected against hazard events and they<br />

should be separated from other parts of the network, to prevent the damage expansion<br />

and blackouts. In order to protect the equipment upon an error occurrence, a protective<br />

system should be used to isolate the defective parts from the whole network and prevent<br />

the fault and limit the damage. Teleprotections are used in conjunction with<br />

communication channels to establish a link between relays and control logic at one site<br />

and control logic and breakers at the other site. In situations of breakdown in voltage<br />

lines or equipment, the protection equipment with an available and reliable<br />

communication media, provide the possibility to isolate damaged sections of the entire<br />

network by sending commands in the shortest possible time.<br />

Present analog teleprotection system with possibility to transmit up to four commands<br />

and capability to connect analog telecommunications, such as analog PLC, are mainly<br />

used in our electrical power utilities. The development of optical fiber<br />

telecommunications network in electrical power industry, need to use teleprotection<br />

system with capability to connect to digital communication network.<br />

Product of this project has the ability to connect digital telecommunication network<br />

through E1 and 64kbps interface (according to G.703 standard) and to send and receive<br />

up to eight commands. The parameters of this product are adjustable. Therefore, it can<br />

be used in different protection schemes (direct, permissive and blocking) in 400, 230<br />

and 63 KV substations.<br />

120

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!