Annual Report 2011-2012

Annual Research Report 2011-2012
Technical specifications:
• Graphical interfaces for input data
• Enable to plan for the already installed netwroks or greenfield cases.
• Performing the optimization on the bases of both technical and economical
aspects.
• Preparing the output plan in the form of graphical electrical maps.
• Reports of static and dynamic information about the optimal plan of distribution
system.
Functional specifications:
This software prepares the optimum plans of distribution system by minimum data
which catches from the useR.After entering data and specifying some constants which is
used during the planning process, the software starts to plan and after a period of time,
the final output will be available for the useR.The time length which software needs for
its optimization depends to the size and geographical dimensions of network and may
vary from several minutes to several days.
After planning process, when the output plan is presented by the software, the user
could provide some reports about the details of the optimum plaN.These reports contain
the information about the static and dynamic specification of the designed network.
In order to implement the provided optimal plan in the network, it is only required to
perform the mechanical design for all parts of networK.This stage is done by the
useR.Then, the complete plan could be implemented in real distribution systems easily.
Application/Performance/Use:
This software could be used by all electrical distribution companies and also by all of
the consultant companies who activate in the field of distribution system planning.
231