DevKit8500D/A User Manual - DMCS Pages for Students

More documents

Recommendations

Info

Using default value 245 12. Print to Check Your Work Command (m for help): [p] Disk /dev/sdc: 2021 MB, 2021654528 bytes 255 heads, 63 sectors/track, 245 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 * 1 51 409626 c W95 FAT32 (LBA) /dev/sdc2 52 245 1558305 83 Linux 13. Save the new partition records on the SD Card This is an important step. All the work up to now has been temporary. Command (m for help): [w] The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot. WARNING: If you have created or modified any DOS 6.x partitions, please see the fdisk manual page for additional information. Syncing disks. 14. Format the partitions The two partitions are given the volume names LABEL1 and LABEL2 by these commands. You 116
can substitute your own volume labels. $ [sudo mkfs.msdos -F 32 /dev/sdc1 -n LABEL1] mkfs.msdos 2.11 (12 Mar 2005) $ [sudo mkfs.ext3 -L LABEL2 /dev/sdc2] mke2fs 1.40-WIP (14-Nov-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 195072 inodes, 389576 blocks 19478 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=402653184 12 block groups 32768 blocks per group, 32768 fragments per group 16256 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: Notes: After formatting and dividing into FAT and EXT3 under ubuntu system, the FAT needs reformatting under windows system, otherwise, start-up with SD card can be realized. 117
Page 1 and 2:
DevKit8500D/A Integrated with LCD,
Page 3 and 4:
Version update records: Rev Date De
Page 5 and 6:
Contents CHAPTER 1 OVERVIEW .......
Page 7 and 8:
4.1 INTRODUCTION...................
Page 9 and 10:
Chapter 1 Overview 1.1 Product intr
Page 11 and 12:
• 512MB 32bit DDR SDRAM • 512MB
Page 13 and 14:
Chapter 2 Hardware System 2.1 CPU 2
Page 15 and 16:
include feature phone, PDA, and han
Page 17 and 18:
2.2.5 TFP410 The TFP410 is a Texas
Page 19 and 20:
2.3.2 Power Output Interface J4 Pin
Page 21 and 22:
8 DSS_D7 LCD Pixel data bit 7 9 GND
Page 23 and 24:
7 D5 Digital image data bit 5 8 D6
Page 25 and 26:
6 NC NC 7 RTS Request To Send 8 CTS
Page 27 and 28:
9 RTCK Receive test clock 10 GND GN
Page 29 and 30:
LED 6 USB1 USB indicator 1 LED 7 US
Page 31 and 32:
1) X-loader is a first level bootst
Page 33 and 34:
cp /media/cdrom/linux/tools/mkimage
Page 35 and 36:
make distclean make devkit8500_conf
Page 37 and 38:
sudo /home/embest/tools/ubinize -o
Page 39 and 40:
drivers/usb/gadget. 3.5 Introductio
Page 41 and 42:
3.5.3 Display interface Control App
Page 43 and 44:
Decoder Driver: A decoder driver mu
Page 45 and 46:
3.6 Driver Development 3.6.1 Driver
Page 47 and 48:
#endif } }; static int __init gpio_
Page 49 and 50:
goto fail2; } error = gpio_directio
Page 51 and 52:
3.6.2 Driver for the gpio_leds 1) D
Page 53 and 54:
* PTU - Pull type Up * DIS - Pull t
Page 55 and 56:
GFP_KERNEL); … for (i = 0; i < pd
Page 57 and 58:
HP USB Disk Storage Format Tool wil
Page 59 and 60:
2011 ……… ……… Remounting
Page 61 and 62:
*** Warning - bad CRC or NAND, usin
Page 63 and 64:
oot@DevKit8500:# echo 1 > /sys/clas
Page 65 and 66: The DevKit8500D/A Development board
Page 67 and 68: 5) Use ping command in the HyperTer
Page 69 and 70: format subformat : S16_LE : STD cha
Page 71 and 72: Display: Stream on... Capture: Stre
Page 73 and 74: eading x-load.bin.ift_for_NAND 1089
Page 75 and 76: Texas Instruments X-Loader 1.47 (Se
Page 77 and 78: File /sdk/build/DVSDK_4_00/4_00_00_
Page 79 and 80: eturn -1; } if((f_led2 = open(LED2,
Page 81 and 82: 4.3 Features Resources of BSP: Cata
Page 83 and 84: 11) Windows Mobile 6 Professional S
Page 85 and 86: GPIO bsp\DevKit8500\SRC\DRIVERS\GPI
Page 87 and 88: MicroSoft Visual Studio Document->
Page 89 and 90: card) Download file type: 1 (You ma
Page 91 and 92: 4) Copy C:\wince600\platform\DevKit
Page 93 and 94: DeviceIoControl(hFile, IOCTL_GPIO_S
Page 95 and 96: Appendix Appendix I Hardware Dimens
Page 97 and 98: Figure Appedix 2.2.2 You can call t
Page 99 and 100: Figure Appedix 2.2.6 Theoretically,
Page 101 and 102: 3. Installing Ubuntu Figure Appedix
Page 103 and 104: Figure Appedix 2.3.5 Click OK Figur
Page 105 and 106: Figure Appedix 2.3.9 Click Forward.
Page 107 and 108: Figure Appedix 2.3.13 Figure Appedi
Page 109 and 110: Figure Appedix 2.3.16 Afterwards, i
Page 111 and 112: 4. Please wait until the installati
Page 113 and 114: Note the "Mounted on" field in the
Page 115: 9. Create the FAT32 partition for b
Page 119 and 120: } server_args = -s /tftpboot -c per
Page 121 and 122: Technical support & Warranty Servic
Page 123 and 124: Note: Those products are returned w
show all

DevKit8500D/A User Manual - DMCS Pages for Students

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?