DevKit8500D/A User Manual - DMCS Pages for Students

oot@DevKit8500:# echo 1 > /sys/class/leds/user_led1/brightness
root@DevKit8500:# echo 0 > /sys/class/leds/user_led1/brightness
4) Control user_led2:
root@DevKit8500:# echo 1 > /sys/class/leds/user_led2/brightness
root@DevKit8500:# echo 0 > /sys/class/leds/user_led2/brightness
The user pushes a LED with operation are to kill bright.
3.8.1.2 KEYPAD Testing
Board has two users keyboard USER1 USER2, users can and perform the following command
testing:
root@DevKit8500:~# evtest /dev/input/event0
Input driver version is 1.0.0evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output
to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "gpio-keys"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 1 (Esc)
Event code 59 (F1)
Testing ... (interrupt to exit)
Event: time 44.232697, type 1 (Key), code 59 (F1), value 1
Event: time 44.232697, -------------- Report Sync ------------
Event: time 44.396515, type 1 (Key), code 59 (F1), value 0
Event: time 44.396515, -------------- Report Sync ------------
Event: time 45.219238, type 1 (Key), code 1 (Esc), value 1
Event: time 45.219268, -------------- Report Sync ------------
Event: time 45.358306, type 1 (Key), code 1 (Esc), value 0
Event: time 45.358306, -------------- Report Sync ------------
63