DevKit8500D/A User Manual - DMCS Pages for Students
DevKit8500D/A User Manual - DMCS Pages for Students
DevKit8500D/A User Manual - DMCS Pages for Students
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The default installation path of the Windows Embedded CE 6.0 in this<br />
context is [C:\WINCE600].<br />
4.4.3 Sysgen & BSP compile<br />
Below are the steps given <strong>for</strong> Sysgen and BSP build<br />
1) Open the existing project file DevKit8500.sln[C:\WINCE600\OSDesigns\DevKit8500]<br />
2) Select [Build-> Build Solution] in vs2005 to sysgen and build BSP.<br />
3) Images including MLO, EBOOTSD.nb0, NK.bin will be created after sysgen phase and build<br />
phase finished successfully, Copy the files MLO, EBOOTSD.nb0 and NK.bin<br />
under[C:\WINCE600\OSDesigns\DevKit8500\DevKit8500\RelDir\DevKit8500_ARMV4I_Release]<br />
to the SD card.<br />
4) Insert the SD card into the device and boot the device <strong>for</strong> a test.<br />
4.4.4 Introduction of driver<br />
The following picture shows the BSP architecture of <strong>DevKit8500D</strong>/A:<br />
Source code path of all drivers of BSP:<br />
NLED driver<br />
bsp\DevKit8500\SRC\DRIVERS\NLED<br />
84
Change language