DevKit8500D/A User Manual - DMCS Pages for Students

More documents

Recommendations

Info

HyperTerminal will display boot message, you can press [SPACE] to enter the EBOOT menu. Flashing image to NAND flash according to the following steps: • Press [5] to enter the Flash menu. • Press [a], [b] and [c] to write XLDR, EBOOT and NK images respectively. • Then press [0] to return to main menu, and respectively press [2], [4], [7] and [y] to change the boot setting. remove TF card and then reboot the system. And then, the system will boot from NAND Flash. 4.6 Instructions for use 4.6.1 How to use S-Video interface In the WinCE operating system 1) Launch Start->Program->Command Prompt in windows CE 2) Type in the line below and enter in Command Prompt do tvout on 4.6.2 How to use openGL ES demo Copy C:\TI\wince_gfx_sgx_01_01_00_patch_01 \PowerVR-SDK\OGLES1.1\Binaries\Demos or C:\WINCE600\PUBLIC\PowerVR\oak\target\Rev125\ARMV4I\retail\*.exe to DevKit8500 wince system. And double click the demos to test. Known problem: Some demos are unable to work normally when DVI is used as output. This problem will be solved in the next release version. 4.6.3 How to use CAM8000-A module 1) Modify the lines below in DevKit8500.bat set BSP_NOCAMERA= set BSP_NOCAMERA_MDC= set BSP_NODIGITALCAMERA=1 2) Rebuild solution in VS2005 to create nk.bin 3) Connect camera8000-A module to DEVKIDevKitT8500 and boot with updated nk.bin. 90
4) Copy C:\wince600\platform\DevKit8500\files\CameraDshowApp_analog.exe to target system and then launch. Knowing issue: CAM8000-A cannot work well on DVI display mode. This problem would be solved in next release edition, so it is recommend that use the 4.3/7 inch LCD when use cam8000-a module currently. 4.6.4 How to use CAM8000-D module 1) Modify the lines below in DevKit8500.bat set BSP_NOCAMERA= set BSP_NOCAMERA_MDC=1 set BSP_NODIGITALCAMERA= 2) Add the line below in the file locate in C:\wince600\platform\DevKit8500\src\driver\dirs camera 3) Rebuild solution in vs 2005 to create nk.bin 4) Connect camera8000-D module to DevKit8500D/A and boot with updated nk.bin. 5) Copy C:\wince600\platform\DevKit8500\files\CameraDshowApp_digital.exe to target system and then launch. 4.7 The development of application This chapter introduces how to develop Windows Embedded CE 6.0 application program in DevKit8500D/A. Before development, it is necessary to install Windows Mobile 6 Professional SDK. Please refer to Appendix VI for download path. It is necessary to establish Windows Embedded CE 6.0 development platform in order to develop Windows Embedded CE 6.0 operating system. The development case in this Manual is based on development of Windows Mobile 6 Professional SDK. 4.7.1 Application program interfaces and examples API used for development of DevKit8500D/A application programs employs Microsoft Windows 91
Page 1 and 2:
DevKit8500D/A Integrated with LCD,
Page 3 and 4:
Version update records: Rev Date De
Page 5 and 6:
Contents CHAPTER 1 OVERVIEW .......
Page 7 and 8:
4.1 INTRODUCTION...................
Page 9 and 10:
Chapter 1 Overview 1.1 Product intr
Page 11 and 12:
• 512MB 32bit DDR SDRAM • 512MB
Page 13 and 14:
Chapter 2 Hardware System 2.1 CPU 2
Page 15 and 16:
include feature phone, PDA, and han
Page 17 and 18:
2.2.5 TFP410 The TFP410 is a Texas
Page 19 and 20:
2.3.2 Power Output Interface J4 Pin
Page 21 and 22:
8 DSS_D7 LCD Pixel data bit 7 9 GND
Page 23 and 24:
7 D5 Digital image data bit 5 8 D6
Page 25 and 26:
6 NC NC 7 RTS Request To Send 8 CTS
Page 27 and 28:
9 RTCK Receive test clock 10 GND GN
Page 29 and 30:
LED 6 USB1 USB indicator 1 LED 7 US
Page 31 and 32:
1) X-loader is a first level bootst
Page 33 and 34:
cp /media/cdrom/linux/tools/mkimage
Page 35 and 36:
make distclean make devkit8500_conf
Page 37 and 38:
sudo /home/embest/tools/ubinize -o
Page 39 and 40: drivers/usb/gadget. 3.5 Introductio
Page 41 and 42: 3.5.3 Display interface Control App
Page 43 and 44: Decoder Driver: A decoder driver mu
Page 45 and 46: 3.6 Driver Development 3.6.1 Driver
Page 47 and 48: #endif } }; static int __init gpio_
Page 49 and 50: goto fail2; } error = gpio_directio
Page 51 and 52: 3.6.2 Driver for the gpio_leds 1) D
Page 53 and 54: * PTU - Pull type Up * DIS - Pull t
Page 55 and 56: GFP_KERNEL); … for (i = 0; i < pd
Page 57 and 58: HP USB Disk Storage Format Tool wil
Page 59 and 60: 2011 ……… ……… Remounting
Page 61 and 62: *** Warning - bad CRC or NAND, usin
Page 63 and 64: oot@DevKit8500:# echo 1 > /sys/clas
Page 65 and 66: The DevKit8500D/A Development board
Page 67 and 68: 5) Use ping command in the HyperTer
Page 69 and 70: format subformat : S16_LE : STD cha
Page 71 and 72: Display: Stream on... Capture: Stre
Page 73 and 74: eading x-load.bin.ift_for_NAND 1089
Page 75 and 76: Texas Instruments X-Loader 1.47 (Se
Page 77 and 78: File /sdk/build/DVSDK_4_00/4_00_00_
Page 79 and 80: eturn -1; } if((f_led2 = open(LED2,
Page 81 and 82: 4.3 Features Resources of BSP: Cata
Page 83 and 84: 11) Windows Mobile 6 Professional S
Page 85 and 86: GPIO bsp\DevKit8500\SRC\DRIVERS\GPI
Page 87 and 88: MicroSoft Visual Studio Document->
Page 89: card) Download file type: 1 (You ma
Page 93 and 94: DeviceIoControl(hFile, IOCTL_GPIO_S
Page 95 and 96: Appendix Appendix I Hardware Dimens
Page 97 and 98: Figure Appedix 2.2.2 You can call t
Page 99 and 100: Figure Appedix 2.2.6 Theoretically,
Page 101 and 102: 3. Installing Ubuntu Figure Appedix
Page 103 and 104: Figure Appedix 2.3.5 Click OK Figur
Page 105 and 106: Figure Appedix 2.3.9 Click Forward.
Page 107 and 108: Figure Appedix 2.3.13 Figure Appedi
Page 109 and 110: Figure Appedix 2.3.16 Afterwards, i
Page 111 and 112: 4. Please wait until the installati
Page 113 and 114: Note the "Mounted on" field in the
Page 115 and 116: 9. Create the FAT32 partition for b
Page 117 and 118: can substitute your own volume labe
Page 119 and 120: } server_args = -s /tftpboot -c per
Page 121 and 122: Technical support & Warranty Servic
Page 123 and 124: Note: Those products are returned w
show all

DevKit8500D/A User Manual - DMCS Pages for Students

Create successful ePaper yourself

Delete template?

Save as template?