Shaping the Energy Efficiency in New Buildings - Building Energy ...
Shaping the Energy Efficiency in New Buildings - Building Energy ...
Shaping the Energy Efficiency in New Buildings - Building Energy ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USA,cont<strong>in</strong>uedTest<strong>in</strong>g Agencies and Certification AssociationsAmerican Society for Test<strong>in</strong>g and MaterialsTest standards for water heat<strong>in</strong>g and cool<strong>in</strong>g are also referenced <strong>in</strong> <strong>the</strong> code (ASHRAE 90.1-2007).With <strong>the</strong> exception of lamps, third-party certification is not mandatory (NAEWG, 2002). Forlamps, <strong>the</strong> U.S. Department of <strong>Energy</strong>, through <strong>the</strong> National Institute of Standards andTechnology, certifies certa<strong>in</strong> laboratories for test<strong>in</strong>g and certification.Examples of Test StandardsReferenced <strong>in</strong> Code(or featured test protocols) 66Properties by Means of <strong>the</strong>Guarded-Hot-Plate ApparatusNational Fenestration Rat<strong>in</strong>gCouncil: NFRC 100-2004 Procedure forDeterm<strong>in</strong><strong>in</strong>g FenestrationProduct U-FactorsUnderwriters Laboratories, Inc.: UL 181A-94 Closure Systemsfor Use with Rigid Air Ductsand Air Connectors UL 181B-95 Closure Systemsfor Use with Flexible AirDucts and Air ConnectorsO<strong>the</strong>r Standards:International Organization forStandardization: ISO 13256-1 (1998) Water-Source Heat Pumps—Test<strong>in</strong>gand Rat<strong>in</strong>g for Performance—Part 1: Water-to-Air andBr<strong>in</strong>e-to-Air Heat PumpsStandards referenced <strong>in</strong> IECC 2006:American Society for Test<strong>in</strong>g andMaterials: E 283—04 Test Method forDeterm<strong>in</strong><strong>in</strong>g <strong>the</strong> Rate ofAir Leakage Through80