Super Smart Ball Bushing Bearing - Hollin Applications

Phone: 1-800-554-8466Website: www.thomsonballbushing.comRoundwayRoundWay Linear Roller BearingsThomson RoundWay*Linear Roller Bearings offer:• up to twenty times the load capacity ofconventional linear ball bearings. Thisdramatic increase allows for morecompact machine designs with areduction in hardware costs.• a rigid design that provides high accuracywhile tolerating the high shock loadscommon to machine tool applications.• a coefficient of friction as low as .005.When replacing v-ways or flat-ways,RoundWay linear roller bearings allow forthe use of smaller less expensive drives,motors, belts, gears and ball screws.• a self-aligning capability that reducesinstallation time and cost.• an eccentric trunnion pin that adjustsbearing height to compensate for minorinaccuracies in mounting base flatness ormachining accuracy. Installation is quickerand easier than old style, conventional waysystems.• availability of an integral wiper thatprotects against contamination whileretaining lubrication.• interchangeable components for quick,cost-effective machine maintenance. Thereis no need to scrap the entire way system,a problem with some linear guide products.• the RoundRail* Advantage combined withthe self aligning feature, eliminates theneed for derating factors commonly seenwith linear guides.• availability from over 1800 distributorsworldwide.©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 103* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.