11.07.2015 Views

Super Smart Ball Bushing Bearing - Hollin Applications

Super Smart Ball Bushing Bearing - Hollin Applications

Super Smart Ball Bushing Bearing - Hollin Applications

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Phone: 1-800-554-8466Website: www.thomsonballbushing.comXR <strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong>sXR <strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong> Productsfor Continuously Supported <strong>Applications</strong>XR <strong>Ball</strong> <strong>Bushing</strong>* <strong>Bearing</strong>sFeatures:• Available in sizes 2 and 3 inch borediameter.• Load capacity range from 4,500 to10,000 lb f .• Pull of load capacity range between2,100 to 8,000 lb f .• Can be mounted in a customhousing.• Travel speeds up to 5 ft/s.• System accelerations up to 160 ft/s 2 .XPBO <strong>Ball</strong> <strong>Bushing</strong> Pillow BlocksFeatures:• Available in 2 and 3 inch diametersizes.• Load capacity range from 4,500 to10,000 lb f .• Pull of load capacity range between2,100 to 4,500 lb f .• Easily secured to table or carriagesurface with four mounting bolts.• Travel speeds up to 5 ft/s.• System accelerations up to 160 ft/s 2 .• When used with XL 60 Case*LinearRace* internal clearance isminimized.• Integral double acting seals at bothends.XL 60 Case LinearRaceFeatures:• Case hardness to 60 HRC minimum.• Surface finish is 8 R a microinchfor 2 and 3 inch diameter and 10 R amicroinch for 4 inch diameter.• Roundness 80 millionths of an inch.• Straightness of .0005 inch per foot(.001 TIR) cumulative.• Available with standard radial drilledand tapped holes.• Minimum depth of hardness is .100inch.XSR 60 Case LinearRace Support RailsFeatures:• All ductile iron, heavy duty design • Can be pre-assembled with aand construction.60 Case LinearRace for quick and• Available in 2 and 3 inch diameter easy installation.sizes.• Precision ground surfaces for• Equipped with drilled thru and60 Case LinearRace and basecounterbored base mounting holes. mounting.• Reference edge for ease ofinstallation.©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 97* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!