Super Smart Ball Bushing Bearing - Hollin Applications

AccessoriesPhone: 1-800-554-8466Website: www.thomsonballbushing.comExternal SealsExternal Seals for Fixed Diameter Housings(Dimensions in inches)O.D.Seals for Fixed DiameterHousingsDouble acting seals for Super Smart, Superand Precision Steel closed type Ball Bushingbearings. Standard and stainless versions.Sizes 1 1 /2 inch and above use spring fingersto reinforce sealing capability which could addto seal drag.TStandardSteelSealPartNumberS-250S-375S-500S-625S-750S-1000S-1250S-1500S-2000S-2500S-3000S-4000StainlessSteelSealPartNumberS-250-SSS-375-SSS-500-SSS-625-SSS-750-SSS-1000-SS––––––(1)Applies to A and XA Precision Steel Ball Bushing bearingsUse withNominalBall Bushing Bearing LinearRacePart NumberDiameter TSUPER-4 or 4812 (1) .250 .125SUPER-6 or 61014 (1) .375 .125SUPER-8 or 81420 (1) .500 .125SSU-10 or SUPER-10 or 101824 (1) .625 .125SSU-12 or SUPER-12 or 122026 (1) .750 .125SSU-24 or SUPER-24 or 243848 (1) 1.500 .375SSU-16 or SUPER-16 or 162536 (1) 1.000 .187SSU-20 or SUPER-20 or 203242 (1) 1.250 .375SUPER-32 or 324864 (1) 2.000 .3756496128 (1) 4.000 .500406080 (1) 2.500 .375487296 (1) 3.000 .500O.D..504.629.8791.1291.2541.5672.0042.3793.0043.7564.5066.006Seals for Adjustable Housings(Dimensions in inches)O.D.Seals for AdjustableHousingsDouble acting seals for Super Smart, Superand Precision Steel Ball Bushing bearings.Seals have a radial slot through thecircumferences to facilitate diameteradjustment. Standard and stainless steelversions.TStandardSteelSealStainlessSteelSealUse with Adjustable Type NominalPartPartBall Bushing Bearing LinearRaceNumber NumberPart NumberDiameter TADJ-S-500ADJ-S-625ADJ-S-750ADJ-S-1000ADJ-S-1250ADJ-S-1500ADJ-S-2000ADJ-S-2500ADJ-S-3000ADJ-S-4000ADJ-S-500-SSADJ-S-625-SSADJ-S-750-SSADJ-S-1000-SS––––––SUPER-8 or 81420 (2)SSU-10 or SUPER-10 or 101824 (2)SSU-12 or SUPER-12 or 122026 (2)SSU-16 or SUPER-16 or 162536 (2)SSU-20 or SUPER-20 or 203242 (2)SSU-24 or SUPER-24 or 243848 (2)SUPER-32 or 324864 (2)406080 (2)487296 (2)6496128 (2) .500.625.7501.0001.2501.5002.0002.5003.0004.000.125.125.125.187.375.375.375.375.500.500.8791.1291.2541.5672.0042.3793.0043.7564.5066.006(2)Applies to ADJ Type Precision Steel Ball Bushing bearingsSeals for Open Type Housings(Dimensions in inches)O.D.Seals for Open TypeHousingsDouble acting seals for Super Smart, Superand Precision Steel Ball Bushing Open Typebearings. Standard andstainless steel versions.TStandardSteelSealStainlessSteelSealUse with Open Type NominalPartPartBall Bushing Bearing LinearRaceNumber NumberPart NumberDiameter TOPN-S-500OPN-S-625OPN-S-750OPN-S-1000OPN-S-1250OPN-S-1500OPN-S-2000OPN-S-2500OPN-S-3000OPN-S-4000OPN-S-500-SSOPN-S-625-SSOPN-S-750-SSOPN-S-1000-SS––––––SUPER-8 or 81420 (3)SSU-10 or SUPER-10 or 101824SSU-12 or SUPER-12 or 122026SSU-16 or SUPER-16 or 162536SSU-20 or SUPER-20 or 203242SSU-24 or SUPER-24 or 243848SUPER-32 or 324864 (3)406080 (3)487296 (3)6496128 (3) .500.625.7501.0001.2501.5002.0002.5003.0004.000.125.125.125.187.375.375.375.375.500.500.8791.1291.2541.5672.0042.3793.0043.7564.5066.006(3)Applies to OPN Type Precision Steel Ball Bushing bearingsPage 128©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.