Super Smart Ball Bushing Bearing - Hollin Applications

AccessoriesPhone: 1-800-554-8466Website: www.thomsonballbushing.comResilient MountsResilient Ball Bushing Bearing Mounts for Ease of InstallationUsed with Precision Steel Ball Bushing bearings Type A and XA. Resilient Ball Bushing bearing mounts are sometimes usedwhen absolute rigidity is not essential and where a slightly larger housing bore can be accommodated. The self-aligning featureof these mounts guarantee uniform load distribution over the entire length of the load carrying balls and compensates for slighterrors in housing bores and parallel 60 Case* LinearRace* alignment. The mount consists of a band of resilient material that canbe easily mounted to the outside diameter of the Ball Bushing bearing. After it is installed in the housing bore it provides permanentresilient, self-aligning support for the bearing. Resilient mounts consist of one rubber ring, 2 spacers and 2 retaining rings.Ball Bushing bearings must be purchased separately.Resilient Ball Bushing Bearing Mounts(Dimensions in inches)Resilient MountAssembly PartNumberRSL-250RSL-375RSL-500RSL-625RSL-750RSL-1000RSL-1250RSL-1500Use withBall BushingBearing NumberNominalLinearRaceDiameterRecommendedHousing Bore±.005A or XA-4812 .250 .625A or XA-61014 .375 .750A or XA-81420 .5001.000A or XA-101824 .6251.313A or XA-122026 .750 1.438A or XA-1625361.0001.813A or XA-203242 1.2502.313A or XA-243848 1.500 2.750Page 130©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.