Super Smart Ball Bushing Bearing - Hollin Applications

Phone: 1-800-554-8466Website: www.thomsonballbushing.comSuper Smart Ball Bushing Bearings60 Case LinearRace Shaftingfor End Supported ApplicationsSolid 60 Case* LinearRace* ShaftingFeatures:• Diameter range between 3 ⁄16 and4 inch.• Roundness 80 millionths of an inch.• Case hardness 60 HRC minimum.• Surface finish 12 R a microinch.• Available in corrosion resistant 440Cstainless steel (50 HRC minimum).• Available with PrePlate* chromeoption.• Standard straightness is .001 inchper foot cumulative (.002 TIR) withspecial straightness at .0005 inchper foot cumulative (.001 TIR)available.SSU60 Case Tubular Lite* LinearRace ShaftingFeatures:• Hollow inner diameter reduces • Available with PrePlate chromeweight and inertia.option.• Diameter range between 3 ⁄4 and • Standard straightness is .001 inch4 inch.per foot cumulative (.002 TIR) with• Roundness 80 millionths of an inch. special straightness at .0005 inch• Case hardness 58 HRC minimum. per foot cumulative (.001 TIR)• Surface finish 12 R a microinch.available.60 Case LinearRace SupportsFor End Supported ApplicationsSB 60 Case LinearRace Shafting End Support BlockFeatures:• Size range between 1 ⁄4 and 2 inch.• Protected by corrosion resistant coating.• Easily secured with two mounting bolts. • Light weight, high strength aluminum alloy• Malleable iron alloy for sizes 1 ⁄2 to 2 inch construction for sizes 1 ⁄4 and 3 ⁄8 inch.diameter.ASB Low Profile 60 Case LinearRace Shafting End Support BlockFeatures:• Size range between 1 ⁄4 and 1 1 ⁄2 inch. • Protected by corrosion resistant anodized• Low profile design.coating.• Easily secured with two mounting bolts. • Light weight, high strength aluminum alloyconstruction.FSB Flanged 60 Case LinearRace End Support BlockFeatures:• Available in 1 ⁄2, 3 ⁄4, 1 and 1 1 ⁄4 inch• Designed specifically for use with Superdiameters.Smart Flanged Pillow Blocks• Flanged mounting surface for easy• Protected by corrosion resistant coating.assembly.• Light weight, high strength aluminum alloy• Easily secured with four mounting bolts. construction.©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 13* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.