Super Smart Ball Bushing Bearing - Hollin Applications

Phone: 1-800-554-8466Website: www.thomsonballbushing.com60 Case LinearRace Shafting (PreDrilled)for Continuously Supported ApplicationsSuper Ball Bushing BearingSolid 60 Case* LinearRace* Shafting with Mounting Holes Features:• Radial drilled and tapped holes ready • Available in corrosion resistant 440Cfor immediate use with standard hole stainless steel (50 HRC minimum).spacing to match standard 60 Case • Available with Preplate chrome option.LinearRace support rails.• Standard straightness .001 inch per• Diameter range between 1 ⁄2 and foot cumulative (.002 TIR) with4 inch.special straightness at .0005 inch• Surface finish 12 R a microinch.per foot cumulative (.001 TIR)• Hardness 60 HRC minimum.available.• Roundness 80 millionths of an inch.60 Case Tubular Lite LinearRace Shafting with Mounting Holes Features:• Hollow design reduces weight and • Roundness 80 millionths of an inch.inertia.• Case hardness 60 HRC minimum.• Radial drilled and tapped holes ready • Surface finish 12 R a microinch.for immediate use.• Available with Preplate chrome option.• Standard hole spacing to match • Standard straightness .001 inch perstandard 60 Case LinearRacefoot cumulative (.002 TIR) withsupport rails.special straightness at .0005 inch• Diameter range between 1 1 ⁄2 and per foot cumulative (.001 TIR)4 inch.available.SUPER60 Case LinearRace Support Rails and Assembliesfor Continuously Supported ApplicationsLSR Low Profile 60 Case LinearRace Support RailFeatures:• Diameter range between 1 ⁄2 and 4 inch. • Low Profile design.• Available with standard mounting holes for • Unlimited travel lengths.immediate use.• Available without mounting holes forcustom hole spacing.SR 60 Case LinearRace Support RailSRA 60 Case LinearRace Support Rail AssemblyFeatures:• Diameter range between 1 ⁄2 and 2 inch.• Available with standard mounting holes forimmediate use.• Available without mounting holes forcustomized hole spacing.• Available as a pre-engineered, ready toinstall assembly.• Light weight, high strength aluminumalloy rail.• Unlimited travel lengths.©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 55* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.