Super Smart Ball Bushing Bearing - Hollin Applications
Super Smart Ball Bushing Bearing - Hollin Applications
Super Smart Ball Bushing Bearing - Hollin Applications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
THOMSON SUPER-DD<strong>Super</strong> <strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong>Phone: 1-800-554-8466Website: www.thomsonballbushing.comSealed <strong>Super</strong> <strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong>s(Closed Type) for End Supported <strong>Applications</strong>C2C1Dd60 Case SolidLinearRaceddD160 Case Tubular LiteLinearRaceCTSealed <strong>Super</strong> <strong>Ball</strong> <strong>Bushing</strong>* <strong>Bearing</strong>s (Closed Type, seal at both ends) and 60 Case* LinearRace*Part Number (2)<strong>Ball</strong><strong>Bushing</strong><strong>Bearing</strong>SUPER-8-DDSUPER-10-DDSUPER-12-DDSUPER-16-DD60 CaseLinearRace1/2 L5/8 L3/4 L1 LNominalDiameterd.500.625.7501.000LengthC1.500/1.4601.750/1.7101.875/1.8352.625/2.585DistanceBetweenRetainingRing GroovesC11.032/1.0121.105/1.0951.270/1.2501.884/1.864RetainingRingGroovemin.C2.050.056.056.070Numberof<strong>Ball</strong>Circuits4566<strong>Ball</strong><strong>Bushing</strong><strong>Bearing</strong>Masslb.05.11.15.2760 CaseLinearRaceMinimumDepth ofHardness.04.04.06.0860 CaseSolidLinearRaceMasslb/in.06.09.13.22(Dimensions in inches)60 CaseTubular LiteLinearRaceMasslb/in——.08.1660 CaseTubular LiteLinearRaceIDD1——.46/.41.62/.56Part Number (2)<strong>Ball</strong><strong>Bushing</strong><strong>Bearing</strong>SUPER-8-DDSUPER-10-DDSUPER-12-DDSUPER-16-DDWorkingBoreDiameterT.5000/.4995.6250/.6245.7500/.74951.0000/.9995Recommended Housing Bore Diameter60 Case<strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong>/LinearRace Fit Up ‡LinearRaceAdjustableFixedAdjustable Diameter Fixed Diameter Diameter HousingDDdHousing (Before Adjustment).8750/.87551.1250/1.12551.2500/1.25051.5625/1.5630.8750/.87601.1250/1.12601.2500/1.25101.5625/1.5635.4995/.4990.6245/.6240.7495/.7490.9995/.9990.0015C/.0000.0015C/.0000.0015C/.0000.0015C/.0000.002C/.0000.002C/.0000.002C/.0000.002C/.0000Dynamic (1)LoadCapacitylb f2554506001050‡ P=Preload, C=ClearanceLoad/Life Graph (Lines indicate limiting load for given <strong>Ball</strong> <strong>Bushing</strong> bearing)Load on most heavily loaded bearing (lbf)20001000100101 10 100 1000Required Travel Life (millions of inches)<strong>Super</strong> 16-DD<strong>Super</strong> 12-DD<strong>Super</strong> 10-DD<strong>Super</strong> 8-DDDetermining <strong>Ball</strong> <strong>Bushing</strong> <strong>Bearing</strong> SizeTo determine the proper <strong>Ball</strong> <strong>Bushing</strong> bearing sizeenter the chart with the maximum load of the mostheavily loaded bearing and the required travel life.Mark where the two lines intersect. All <strong>Ball</strong><strong>Bushing</strong> bearing sizes that pass through or aboveand to the right of this point may be suitable forthis application.Note: For the purpose of using this chart.Load on most heavily loaded bearing = maximumapplied load/K 0*Where K 0 can be determined from the Polar Graphto the right.Page 46©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.
Change language