Super Smart Ball Bushing Bearing - Hollin Applications

Super Smart Ball Bushing BearingsPhone: 1-800-554-8466Website: www.thomsonballbushing.comPick and Place X-Y SystemObjectiveBuild an X-Y System that transfers the work piecebetween two separate machining stations.SolutionAssemble the X-Y System utilizing Super Smart pillowblocks on end supported 60 Case* LinearRace* for theX-axis and continuously supported 60 Case LinearRaceon the Y-axis. Utilize Thomson Ball Screw Assembliesfor high speed positioning.BenefitsThe 60 Case LinearRace and 60 Case LinearRace endsupport blocks provided an important bridge betweenmachining stations. The Super Smart Ball Bushing pillowblocks and Thomson ball screws provided uninterruptedhigh speed movement of the work piece. Productivityincreased by 200%.Products SpecifiedX-axis2 – 1 1 ⁄2 L CTL x 48.00 in (60 Case LinearRace)4 – SB24 (60 Case LinearRace End Support Blocks)4 – SSUPB-24 (Super Smart Ball Bushing* Pillow Blocks)1 – 1 1 ⁄4 x .200 (Thomson Ball Screw Assembly)Y-axis2 – LSR-20 x 48.00 in (Low Profile 60 Case LinearRaceSupport Rail)4 – SSUPBO-20 (Super Smart Ball Bushing PillowBlocks)1 – 1 1 ⁄4 x .200 (Thomson Ball Screw Assembly)2 – 1 1 ⁄4 L CTL x 48.00 in (60 Case LinearRace)1 1 /4 x .200 ThomsonBall Screw Assembly1 1/2 L CTL x 48.0LSR-20-PDSSUPBO-20SB24SSUPB-24Page 36©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.