Super Smart Ball Bushing Bearing - Hollin Applications

Phone: 1-800-554-8466Website: www.thomsonballbushing.comPrecision Steel Ball Bushing Bearings60 Case LinearRace (PreDrilled)for Continuously Supported Applications60 Case* Solid LinearRace* with Mounting Holes Features:• Radial drilled and tapped holes ready • Available in corrosion resistant 440Cfor immediate use with standard hole stainless steel (50 HRC minimum).spacing to match standard 60 Case • Available with Preplate chrome option.LinearRace support rails.• Standard straightness .001 inch per• Diameter range between 1 ⁄2 and foot cumulative (.002 TIR) with4 inch.special straightness at .0005 inch• Surface finish 12 R a microinch.per foot cumulative (.001 TIR)• Hardness 60 HRC minimum.available.• Roundness 80 millionths of an inch.60 Case Tubular Lite LinearRace with Mounting Holes Features:• Hollow design reduces weight • Roundness 80 millionths of an inch.and inertia.• Case hardness 58 HRC minimum.• Radial drilled and tapped holes • Surface finish 12 R a microinch.ready for immediate use.• Available with Preplate chrome option.• Standard hole spacing to match • Standard straightness .001 inch perstandard 60 Case LinearRacefoot cumulative (.002 TIR) withsupport rails.special straightness at .0005 inch• Diameter range between 1 1 ⁄2 and per foot cumulative (.001 TIR)4 inch.available.60 Case LinearRace Support Rails and Assembliesfor Continuously Supported ApplicationsPRECISIONLSR Low Profile 60 Case LinearRace Support RailFeatures:• Diameter range between 1 ⁄2 and 4 inch. • Low Profile design.• Available with standard mounting holes for • Unlimited travel lengths.immediate use.• Available without mounting holes forcustom hole spacing.SR 60 Case LinearRace Support RailSRA 60 Case LinearRace Support Rail AssemblyFeatures:• Diameter range between 1 ⁄2 and 2 inch.• Available with standard mounting holes forimmediate use.• Available without mounting holes forcustomized hole spacing.• Available as a pre-engineered, ready toinstall assembly.• Light weight, high strength aluminumalloy rail.• Unlimited travel lengths.©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 87* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.