Super Smart Ball Bushing Bearing - Hollin Applications

Precision Steel Ball Bushing BearingPhone: 1-800-554-8466Website: www.thomsonballbushing.comPrecision Steel Ball Bushing Bearings and PillowBlocks for End Supported ApplicationsPrecision Steel Ball Bushing Bearings (Closed type)Features:• Coefficient of friction as low as .001.• Available in corrosion resistant stainless steel• Load capacity range from 19 to 5,000 lbf. for diameters up to 1 inch.• High operating temperature capability. • All steel construction for increased rigidity.• Available in sizes 1⁄4 to 4 inch bore diameter. • Sizes 1⁄2, 3⁄4 and 1 inch available with• Can be mounted in a custom housing.integral, double acting wipers.• Travel speeds up to 10 ft/s.Extra Precision Steel Ball Bushing Bearings (Closed type)• Increased precision for high accuracypositioning and repeatability• Coefficient of friction as low as .001.• Load capacity range from 19 to 5,000 lbf.• High operating temperature capability.• Available in sizes 1⁄4 to 4 inch borediameter.• Can be mounted in a custom housing.• Travel speeds up to 10 ft/s.• Available in corrosion resistant stainless steelfor diameters up to 1 inch.• All steel construction for increased rigidity.• Sizes 1⁄2, 3⁄4 and 1 inch available withintegral, double acting wipers.Adjustable Precision Steel Ball Bushing Bearings (Closed Type)Features:• Adjustment capability provides minimum • Available in sizes 1⁄2 to 4 inch bore60 Case* LinearRace* shaft and bearing diameter.clearance for improvements in positioning • Can be mounted in a custom housing.accuracy and repeatability.• Travel speeds up to 10 ft/s.• Coefficient of friction as low as .001.• All steel construction for increased rigidity.• Load capacity range from 85 to 5,000 lbf. • Available in corrosion resistant stainless steel• High operating temperature capability.for diameters up to 1 inch.Precision Steel Ball Bushing Pillow Blocks (Closed and Adjustable Type)Features:• Coefficient of friction as low as .001.• Easily mounted and secured with four• Load capacity range from 85 to 1,100 lbf. mounting bolts.• High operating temperature capability. • All metal construction for increased rigidity.• Available in sizes 1⁄2 to 2 inch bore diameter. • Available with integral, double acting seals.• Self-aligning for easy installation.• Adjustment capability provides minimum• Travel speeds up to 10 ft/s.60 Case LinearRace and bearing clearance• Pillow Blocks are available with corrosion for improvements in positioning accuracyresistant stainless steel Ball Bushing bearingsup to 1 inch.and repeatability.Miniature Instrument Ball Bushing BearingsFeatures:• Available in sizes 1⁄8, 3⁄16 and 1⁄4 inchbore diameter.• Available with a matched 60 CaseLinearRace• Coefficient of friction as low as .001.• Compact size for low inertia and weight.• Precision bearing balls, sleeve and 60 CaseLinearRace manufactured of corrosionresistant stainless steel.• Load Capacity range between 7 and 19 lbf.Die Set Ball Bushing BearingsFeatures:• Available in sizes 1, 11⁄4, 11⁄2 and 2 inchbore diameter.• Load Capacity range between 350 and1,100 lbf.• All steel construction for maximum rigidity.• Travel speeds up to 10 ft/s.• Easily mounted by simply bolting toe clampsin place.• Can be mounted perpendicular to mountingsurface.• High operating temperature capability.• Coefficient of friction as low as .001.Page 70©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.