Super Smart Ball Bushing Bearing - Hollin Applications

Phone: 1-800-554-8466Website: www.thomsonballbushing.comSuper Ball Bushing Bearing60 Case LinearRace Support Rails and Assembliesfor Continuously Supported ApplicationsType LSR and LSR-PD LinearRace Support RailsHdH1AMLSR-PD with PreDrilled mounting holes.Y X N248 in. Standard Length20ºTYP12ºTYPMaterial: Steel AlloyLonger lengths are availableBaseMountingSurfaceType LSR and LSR-PD 60 Case* LinearRace* Support RailsLSRStandardWithoutHolesLSR-8LSR-10LSR-12LSR-16LSR-20LSR-24LSR-PDStandardw/PreDrilledHolesLSR-8-PDLSR-10-PDLSR-12-PDLSR-16-PDLSR-20-PDLSR-24-PDNominalLinearRaceDiameterd.500.625.7501.0001.2501.500H±.002.562.687.7501.0001.1871.375H1.34.41.42.56.63.70A.37.45.51.69.78.93M.25.31.38.50.56.69Mounting HolesN2Hole.17.19.22.28.34.41(Dimensions in inches)N1Bolt#6-32#8-32#10-321 ⁄4-205 ⁄16-183 ⁄8-16X446668Y223334LSRMasslb/ft.32.49.591.011.271.6820ºHH1Type SR and SR-PD 60 Case LinearRaceSupport Rails and AssembliesdA1EAMN3Y24 in. Standard LengthXMaterial: Aluminum AlloyLonger lengths are availableType SR/ SR-PD LinearRace Support Rails and AssembliesSRWithoutHolesSR-8SR-10SR-12SR-16SR-20SR-24SR-PDWithPreDrilledHolesSR-8-PDSR-10-PDSR-12-PDSR-16-PDSR-20-PDSR-24-PDAssy.W/SolidLinearRaceSRA-8SRA-10SRA-12SRA-16SRA-20SRA-24Nom.LinearRaceDia.d.500.625.7501.0001.2501.500H±.0021.1251.1251.5001.7502.1252.500H1.19.25.25.25.31.38A1.501.631.752.132.503.00A1±.002.750.813.8751.0631.2501.500E1.001.131.251.501.882.25M.25.31.38.50.56.69Hole.17.19.22.28.34.34N3Bolt#6#8#101 ⁄45 ⁄165 ⁄16(Dimensions in inches)LinearRaceMountingBoltN1#6-32 x .88#8-32 x .88#10-32 x 1.251 ⁄4-20 x 1.505 ⁄16-18 x 1.753 ⁄8-16 x 2.00X446668Y223334SRMasslb/ft.60.801.001.402.102.60SUPER(1)The Dynamic Load Capacity is based on a rated travel life of 2 million inches.The actual Dynamic Load Capacity can be affected by the orientation of thebearing or the direction of the applied load. For dynamic load correctionfactors see polar graphs below.(2)For the maximum length of all 60 Case LinearRace Support Rail Assemblieswithout 60 Case LinearRace Joints see maximum length table on page 57.60 Case LinearRace Support Rail Assemblies are available with 60 CaseLinearRace joints for unlimited travel lengths.(3)For part number description and specifications see page 56 and 57.Note: For additional technical data, see Engineering Support Appendix.Polar GraphsStandardWithoutHolesStandardWithPreDrilledHolesAssemblyWith Solid60 CaseLinearRaceStandardSingle PieceLength (2)inMaximumSingle PieceLength (2)inLSR LSR-PD – 48 96SR SR-PD SRA 24 72The actual Dynamic Load Capacity of a Ball Bushing bearing is determined by the orientation of the bearing or direction of the applied load. The loadCorrection Factor K 0 is found by knowing the direction of the applied load relative to the orientation of the bearings ball tracks and referring to the polar graph.To determine the actual Dynamic Load Capacity, multiply the proper correction factor by the Dynamic Load Capacity listed in the product table on theprevious page.K 0K 0TWN-8-OPNTWN-10-OPNTWN-12-OPNTWN-16-OPNTWN-20-OPNTWN-24-OPN©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.Page 65* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.