Super Smart Ball Bushing Bearing - Hollin Applications

Super Ball Bushing BearingPhone: 1-800-554-8466Website: www.thomsonballbushing.comSuper Ball Bushing Bearings and Pillow Blocksfor Continuously Supported ApplicationsSuper Ball Bushing* Bearings (Open Type)Features:• Available in sizes 1 ⁄2-2 inch• Can be mounted in customizeddiameter.housing.• Load capacity ranges from 230 to • Travel speeds up to 10 ft/s.2,350 lb f .• Available with corrosion resistant• Self-aligning in all directions.components.• Can be adjusted to take outdiametrical clearance.Sealed Super Ball Bushing Bearings (Open Type)Features:• Standard integral double acting seals • Self-aligning in all directions.retain lubrication and keep out • Can be adjusted to take outcontaminants.diametrical clearance.• Available in sizes 1 ⁄2, 3 ⁄4 and 1 inch • Can be mounted in customizeddiameter.housing.• Load capacity ranges from 230 to • Travel speeds up to 10 ft/s.780 lb f .• Available with corrosion resistantcomponents.Super Ball Bushing Pillow Blocks (Open Type)Features:• Available in sizes 1 ⁄2-2 inch diameter. • Available with corrosion resistant• Load capacity ranges from 230 to components.2,350 lb f .• Easily mounted and secured with• Self-aligning in all directions.four mounting bolts.• Can be adjusted to take out• Available with standard lubricationdiametrical clearance.access. Sizes .25, .375 and .500• Travel speeds up to 10 ft/s.have oil lubricant fitting. Sizes .625• Standard integral double acting seals and above have 1 ⁄4-28 access forretain lubrication and keep outlubrication.contaminants.Super Ball Bushing Twin Pillow Blocks (Open Type)Features:• Available in sizes 1 ⁄2-1 1 ⁄2 inch diameter.• Load capacity ranges from 460 to3,120 lb f .• Can be adjusted to take outdiametrical clearance.• Available with corrosion resistantcomponents.• Standard integral double acting sealsretain lubrication and keep outcontaminants.• Easily mounted and secured with fourmounting bolts.• Maximum travel speeds up to 10 ft/s.• Available with standard lubricationaccess. Sizes .25, .375 and .500 haveoil lubricant fitting. Sizes .625 andabove have 1 ⁄4-28 access forlubrication.• Built-in lubrication wick for continuouslubrication.Page 54©2003 Danaher Motion. Printed in the U.S.A. The specifications in this publication are believed to be accurate and reliable.However, it is the responsibility of the product user to determine the suitability of Thomson products for a specific application.While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.* Trademark of Danaher Motion. DANAHER MOTION is registered in the U.S. Patent and Trademark Office and in other countries.