Linear Positioners Catalog_en-US_revA - Kollmorgen

Position SensorsL I N E A R P O S I T I O N E R SPosition Sensor MountingThe diagrams below show sensor mounting location whencylinder magnet and sensor are physically aligned.This location is recommended as a starting point when settingup a cylinder for the first time. Depending on the speed andpayload of the application, switches may need to be movedinward to prevent hard-stop crash when the load travels at fullspeed past a limit switch.Notes:• Position sensors can be mounted along either side of a cylinder.• Recommended minimum distance between switches is0.65 inches.• Using position sensors for end-of-travel protection reduceseffective travel distance. Contact Kollmogen for assistance.Ordering InformationPosition SensorsModel Number Description LEDWire Leads10 ft [3 m]Quick Disconnect13 ft [4 m 1 ]PSP-1 2 PSP-1Q 2 N.O. PNP Hall Effect YellowPSP-2 2 PSP-2Q 2 N.C. PNP Hall Effect RedNotes:1. Long length 30 ft [9 m] quick-disconnect cables are available,specify by adding –C9M to part number (example: PSP-1Q-C9M).2. PNP Hall Effect Switches are not compatible with Kollmorgencontrols. These versions are offered for compatibility withdevices which require PNP style sensors.Dimensions in [mm]N2 Cylinder Position Sensor MountingSpare Quick Disconnect CablesModel NumberDescriptionQPS-4M13 ft [4 m] extension cable0.44[11.2]Phillips Head ScrewQPS-9M30 ft [9 m] extension cableA 0.39[9.9]BNOTE: Dimensions "A" and "B"are Approximate End of StrokeLocations for the Position Sensors.EC Cylinder Position Sensor Mounting1.16[29.5]Model Dim "A" Dim "B"N2 Acme 1.00 [25.4] 0.70 [17.8]N2 Ball 1.40 [35.6] 0.30 [7.6]NOTE: Dimensions "A" and "B" are Approximate End of StrokeLocations for the Position Sensors.0.44[11.2]Phillips Head ScrewModelDim "A"in [mm]Dim "B"in [mm]N2 Lead 1.00 (25.4) 0.70 (17.8)N2 Ball 1.40 (35.6) 0.30 (7.6)A0.39[9.9]BNOTE: Dimensions "A" and "B"are Approximate End of StrokeLocations for the Position Sensors.Model Dim "A" Dim "B"EC2 Series2.90 [73.7]1.90 [48.3]1.16[29.5]EC3 Series 3.03 [77.0] 2.23 [56.6]EC4 Series 5.39 [137.0] 2.48 [63.0]EC5 Series 5.39 [137.0] 2.48 [63.0]NOTE: Dimensions "A" and "B" are Approximate End of StrokeLocations for the Position Sensors.ModelDim "A"in [mm]Dim "B"in [mm]EC1 0.748 (19.0) 0.551 (14.0)EC2 2.90 (73.7) 1.90 (48.3)EC3 3.03 (77.0) 2.23 (56.6)EC4 5.39 (137.0) 2.48 (63.0)EC5 5.39 (137.0) 2.48 (63.0)64K O L L M O R G E N