NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

SymbolsCodabarCheck DigitCodabar may include Check Digit (not compulsory) following its barcodemessage. It verifies the barcode message.» "NO Check, Transmit All" means to read without check and transmitall bytes including barcode message and Check Digit.» "Check, Do Not Transmit Check Digit" means to read and check. Ifverification is successful, transmits barcode message; if not, engine sends anerror beep.» "Check, Transmit All" means to read and check. If verification is successful,transmits all messages; if not, engine sends an error beep.ToolsCode Programming ONCode Programming OFFNO Check, Transmit All【Pro CMD:99912503】Check, Do not transmit Check Digit【Pro CMD:99912505】Check, Transmit All【Pro CMD:99912504】When “Check, Do not Transmit Check digit” is enabled and barcode message lengthminus one is less than Min Message Length, it will lead to error beep.E.g.:Reading a 4-byte (include check byte) Codabar with the Min Message Length being 4bytes and “Check, Do not transmit Check Digit” enabled leads to error beep.nlscan.comPage 98