NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

SymbolsCode 11Check DigitCode 11 may include Check Digit (not compulsory) following its barcodemessages. If included, it may be the last one or two digits. It verifies thebarcode message.ToolsCode Programming ONCode Programming OFF» “NO Check, Transmit All” means to read without check and transmitall bytes including barcode message and Check Digit.No Check【Pro CMD:99912703】Single Check Digit,MOD11【Pro CMD:99912704】Double Check Digits, MOD11/MOD11【Pro CMD:99912705】Double Check Digits, MOD11/MOD9【Pro CMD:99912706】Single Check Digit MOD11(Len 10)【Pro CMD:99912707】Single Check Digit MOD11 (Len 10)【Pro CMD:99912710】Do not transmit Check Digit【Pro CMD:99912711】Transmit Check Digit【Pro CMD:99912712】When “Check, Do Not Transmit Check Digit” is enabled and barcode message lengthminus one is less than Min Message Length, it will lead to error beep.E.g.:Reading a 4-byte (include Check Digit) Code 11 with the Min Message Length being4 bytes and “Check, Do Not Transmit Check Digit” enabled leads to error beep.nlscan.comPage 105