NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis
NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis
NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting to StartON, OFF, IDLE, RESTARTPower OnConnect <strong>HR100</strong> <strong>Series</strong> and Host. One click the "Trigger". <strong>HR100</strong> <strong>Series</strong> powers on and in "Idle" (readyto use) state (factory default).Power OffThere are 4 ways to "Power OFF":» Remove Cable Off <strong>HR100</strong> <strong>Series</strong>;»»»Remove Power Adapter Off RS232 Cable;Remove USB Cable Off the Host;Remove PS/2 cable off the Host and power adaptor.IDLEWhen reader is NOT reading, it is in "IDLE mode".No reading attempt within a timeout, the Imager switch to IDLE mode automatically.RESTARTIf <strong>HR100</strong> <strong>Series</strong> halted and does not respond to operations, please "Restart" by "Power OFF", and then"Power ON".Maintenance»»»»»»The scan window must be kept clean. Improper maintenance will breach the limited warranty.Avoid rough objects not to damage or scratch the window.Use brush to remove the stain.Use soft cloth (cloth for glasses) to clean.Prohibit spraying towards the window.Only use clean water as a cleanser.nlscan.comPage 11
Change language