NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

SymbolsMatrix 2 of 5( European Matrix 2 of 5)Check DigitToolsCode Programming ONMatrix 2 of 5 may include Check Digit (not compulsory) following its barcodemessages. If included, it may be the last digit. It verifies the barcode message.Code Programming OFF» “NO Check, Transmit All” means to read without check and transmitall bytes including barcode message and Check Digit.» “Check, Do Not Transmit Check Digit” means to read and check.If verification is successful, transmits barcode message; if not, engine sendsan error beep.» “Check, Transmit All” means to read and check. If verification issuccessful, transmits all messages; if not, engine sends an error beep.NO Check, Transmit All【Pro CMD:99912003】Check, Transmit All【Pro CMD:99912004】Check, Do Not Transmit Check Digit【Pro CMD:99912005】When “Check, Do Not Transmit Check Digit” is enabled and barcode message lengthminus one is less than Min Message Length, it will lead to error beep.E.g.:Reading a 4-byte (include Check Digit) Matrix 2 of 5 with the Min Message Lengthbeing 4 bytes and “Check, Do Not Transmit Check Digit” enabled leads to error beep.nlscan.comPage 85