NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

General ProgrammingReading ModeDelayed Sensor ModeToolsCode Programming ONAfter programming, the engine will start to sense the environment without trigger.Code Programming OFFThere will be a delay before a scan. After a scan, it will stop and keep sensing to waitanother illumination changing. In delayed sensor mode, a trigger also can start a scan.The sensitivity level could be chosen.Delayed Sensor Mode【Pro CMD:99900115】In delayed sensor mode, the engine could set Reading a barcode time length and interval length.Reading a barcode time length【Pro CMD:99900150】Interval Length【Pro CMD:99900151】In delayed sensor mode, reading a barcode time takes 2s as a unit and the range is from 0 to30ms, 0 is infinite time; Interval takes 200ms as unit and the range is from 0 to 7.5s.nlscan.comPage 28