NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

General ProgrammingCode ProgrammingToolsCode Programming ONRead the “Code Programming ON” barcode to activate “Code Programming”function. More than one Code Programming barcodes can be read toconfigure the Engine.If an option or feature needs additional parameters, such as digits, they can befound at the end of this chapter.The value of code programming can be sent to the Host. For factory default,“No Send Pro Code Value”, the value of programming codes will not besent to the Host; by reading “Send Pro Code Value”, the reader will send thevalue of Programming Code to the Host.Code Programming OFFThe factory default setting is “Code Programming ON”. Because it has low probability that a databarcode is the same as a programming barcode, it doesn’t need to close the function of Code Programming.Keeping it on won’t affect the daily using.Some working parameters could be programmed. The data type of parameters is Dec or Hex and the numbersare also input through programming barcodes. The Appendix of the Integration Guide includes all neededdata barcodes.Programming barcodes are used to program the engine. For factory default, the reader will not send codevalue to the Host. But if needed, the engine could be programmed to "Send Pro Code Value". And whetherthe value is sent or not won't affect the programming function. But "Send Pro Code Value" is a temporarysetting. It will restore to "No Send Pro Code Value" when the engine is restarted or closed.Code Programming ON【Pro CMD:99900031】Code Programming OFF【Pro CMD:99900032】No Send Pro Code Value【Pro CMD:99900033】Send Pro Code Value【Pro CMD:99900034】nlscan.comPage 18