NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

SymbolsInterleaved 2 of 5Check DigitToolsCode Programming ONInterleaved 2 of 5 may include Check Digit (not compulsory) following itsbarcode messages. If included, it could be the last digit. It verifies the barcode Code Programming OFFmessage.» “NO Check, Transmit All” means to read without check and transmitall bytes including barcode message and Check digit.» “Check, Do Not Transmit Check Digit” means to read and check. Ifverification is successful, transmit barcode message; if not, engine sends anerror beep.» “Check, Transmit All” means to read and check. If verification issuccessful, transmit all messages; if not, engine sends an error beep.“NO Check, Transmit All”【Pro CMD:99911203】Check, Do Not Transmit Check Digit【Pro CMD:99911204】Check, Transmit All【Pro CMD:99911205】When “Check, Do Not Transmit Check digit” is enabled and barcode message lengthminus one is less than Min Message Length, it will lead to error beep.E.g.:Reading a 4-byte (include check Digit) Interleaved 2 of 5 with the Min MessageLength being 4 bytes and “Check, Do Not Transmit Check digit” enabled leads to errorbeep.nlscan.comPage 75