NLS-HR100 Series Hand-held 1D Barcode Scanner User ... - Sensis

General ProgrammingIntroductionThere are 2 ways to program (configure) the Engine, Code Programming and Command Programming.Code ProgrammingThe Engine reads a set of specially encoded barcodes to program options and features. In the followingsections, we will explain the options and features available and provide the barcodes to program them.This method of programming the Engine is most straight forward. However, it requires manually readings ofeach barcode. As all manual operations, errors are more likely to occur.Command ProgrammingThe Host can send the Pro CMD strings to program the Engine. In the following sections, the Pro CMDstrings will be included with the barcodes for Code Programming.This method of programming the Engine could be automated. A software program can be developed todownload all the configuration data to the Engine. The program can also verify the download.Note: Except some temporary programming, the programming results are restored in non-volatile memory.They will not be lost when the Engine is powered off.nlscan.comPage 16