PGI Fortran - Servidor WWW del Cluster Ladon-Hidra

produces:25.00 2500.00 2500.00 2500.00 2500.00 2500.00Note that the effect of the scale factor continues until another scale factor is used.5.5.2.16 Q Format Control - QuantityThe Q edit descriptor calculates the number of characters remaining in the input record and storesthat value in the next I/O list item. On output, the Q descriptor skips the next I/O item.5.5.2.17 S Format Control – Sign ControlThe S format specifier restores the default processing for writing a plus; the default is SSprocessing.SP forces the processor to write a plus in any position where an optional plus is found in numericoutput fields, this only affects output statements.SS stops the processor from writing a plus in any position where an optional plus is found innumeric output fields, this only affects output statements.5.5.2.18 T , TL and X Format Controls – Spaces and Tab ControlsThe T specifier controls which portion of a record in an iolist value is read from or written to afile. The general form, which specifies that the nth value is to be written to or from a record, is asfollows:TnThe TL form specifies the relative position to the left of the data to be read or written:TLnand specifies that the nth character to the left of the current position is to be written to or from therecord. If the current position is less than or equal to n, the transmission will begin at position oneof the record.The TR form specifies the relative position to the right of the data to be read or written:TRnand specifies that the nth character to the right of the current position is to be written to or from therecord.Fortran Intrinsics 165