PGI Fortranï - Servidor WWW del Cluster Ladon-Hidra

More documents

Recommendations

Info

Return ValueThe shifted array with the same size and shape as the argument ARRAY.EOSHIFT §Perform an end-off shift on the specified array.SynopsisCSHIFT(ARRAY, DIM, SHIFT, BOUNDARY)ArgumentsThe argument ARRAY is the array to shift. It may be an array of any type. The argument DIM is aninteger representing the dimension to shift. The argument SHIFT is an integer or an array ofintegers with rank n-1 where n is the rank of ARRAY. The optional argument BOUNDARY is of thesame type as the array, it may be scalar or of rank n-1 where n is the rank of ARRAY. BOUNDARYis the value to fill in the shifted out positions. By default it has the following values for integer, 0,for real, 0.0, for complex, (0.0,0.0), for logical false, for character the default is blank characters.Return ValueThe shifted array with the same size and shape as the argument ARRAY.RESHAPE §Reconstructs an array with the specified shape using the elements of the source array.SynopsisRESHAPE(SHAPE, SOURCE [,PAD] [,ORDER])ArgumentsThe argument SHAPE is of type integer, rank one. It must not have more than 7 elements and novalues can be negative. The argument SOURCE is an array of any type. The optional argumentPAD must be the same size and type as SOURCE. The optional argument ORDER must be of typeinteger and must have the same shape as SHAPE.Return ValueThe return value is an array of shape SHAPE, with the same type as SOURCE. Array elements arefilled into the new array in array element order.252 Chapter 6
7 3F Functions and VAXSubroutinesThe PGI Fortran compilers support FORTRAN 77 3F functions and VAX/VMS systemsubroutines and built-in functions.7.1 3F RoutinesThis section describes the functions and subroutines in the Fortran run-time library which areknown as 3F routines on many systems. These routines provide an interface from Fortranprograms to the system in the same manner as the C library does for C programs. These functionsand subroutines are automatically loaded from PGI 's Fortran run-time library if referenced by aFortran program.The implementation of many of the routines uses functions which reside in the C library. If a Clibrary does not contain the necessary functions, undefined symbol errors will occur at link-time.For example, if PGI’s C library is the C library available on the system, the following 3F routinesexist in the Fortran run-time library but use of these routines will result in errors at link-time:besj0besj1besjnbesy0besy1besyndbesj0dbesj1dbesjndbesy0dbesy1dbesynderfderfcerferfc3F Functions and VAX Subroutines 253
Page 2:
While every precaution has been tak
Page 8 and 9:
Table 6-18: HPF Intrinsics and Libr
Page 10 and 11:
• ISO/IEC 1539 : 1991, Informatio
Page 12 and 13:
non-printing characters, such as TA
Page 14 and 15:
1 Language OverviewThis chapter des
Page 16 and 17:
Table 1-1: Order of StatementsOPTIO
Page 18 and 19:
1.3 Free Form FormattingUsing free
Page 20 and 21:
A continuation line is indicated by
Page 22 and 23:
The following examples are invalid
Page 24 and 25:
Operators of equal rank are evaluat
Page 26 and 27:
1.7.3 Relational ExpressionsA relat
Page 28 and 29:
1.9 Assignment StatementsA Fortran
Page 30 and 31:
defined in the character expression
Page 33 and 34:
2 Fortran Data TypesEvery Fortran e
Page 35 and 36:
Table 2-3: Data Type ExtensionsType
Page 37 and 38:
[s]d 1 d 2 ...d n [ _ kind-paramete
Page 39 and 40:
2.2.5 Complex ConstantsA complex co
Page 41 and 42:
CHARACTER(LEN=20) FIRST, LAST, MIDD
Page 43 and 44:
2.4.4 Character SubstringA characte
Page 45 and 46:
• A constant is always either 32
Page 47 and 48:
STRUCTURE [/structure_name/][field_
Page 49 and 50:
RECORD /person/ population(2), me..
Page 51 and 52:
BYTE items(12)END MAPEND UNIONEND S
Page 53:
declarator, modifying its value dur
Page 56 and 57:
90/95 This statement is either new
Page 58 and 59:
ALLOCATE 90The ALLOCATE statement i
Page 60 and 61:
DescriptionARRAY can be used in a s
Page 62 and 63:
ExamplesBACKSPACE 4BACKSPACE ( UNIT
Page 64 and 65:
ExamplesCALL CRASH! no argumentsCAL
Page 66 and 67:
Note: The data type of a symbol may
Page 68 and 69:
HPFExampleDIMENSION R(10)COMMON /HO
Page 70 and 71:
ALL1is an allocatable COMMON block
Page 72 and 73:
I = I + H..END SUBROUTINE YEND SUBR
Page 74 and 75:
DEALLOCATE 77The DEALLOCATE stateme
Page 76 and 77:
See AlsoREAD, PRINTDIMENSION 90The
Page 78 and 79:
DO (non-block)DO label [,] index =
Page 80 and 81:
DOUBLE COMPLEX § 77The DOUBLE COMP
Page 82 and 83:
SyntaxIF logical expression THENsta
Page 84 and 85:
cfbioserrsis an integer expression
Page 86 and 87:
For example:END FILE(20)END FILE(UN
Page 88 and 89:
e more than one ENTRY statement wit
Page 90 and 91:
EQUIVALENCE 77The EQUIVALENCE state
Page 92 and 93:
extrinsic-kind-keyword is the name
Page 94 and 95:
if no list items are specified; in
Page 96 and 97:
argumentis a symbolic name, startin
Page 98 and 99:
ExampleslistASSIGN 50 TO KGO TO K(5
Page 100 and 101:
IF (Block) 77The block IF statement
Page 102 and 103:
INCLUDE § 77The INCLUDE statement
Page 104 and 105:
FILE= finFORM= fmfin is a character
Page 106 and 107:
DescriptionWhen an INQUIRE by file
Page 108 and 109:
INTEGER, INTENT(OUT)::I1I1=R1END SU
Page 110 and 111:
SUBROUTINE TRIG (X,F,Y)Y=F(X)RETURN
Page 112 and 113:
Manipulating data using union decla
Page 114 and 115:
Using the -I command-line option di
Page 116 and 117:
ERR=errsFILE= finFORM=fmcharacter d
Page 118 and 119:
ACCESSThe value of 'APPEND' will be
Page 120 and 121:
• Case is not significant, unless
Page 122 and 123:
The pointer-based variable does not
Page 124 and 125:
and is roughly equivalent tocharact
Page 126 and 127:
.END MODULETypeNon-executableSee Al
Page 128 and 129:
• Every item whose value is to be
Page 130 and 131:
DescriptionYou create memory storag
Page 132 and 133:
RETURN 77The RETURN statement cause
Page 134 and 135:
line option). Dummy arguments, name
Page 136 and 137:
STRUCTURE § 77The STRUCTURE statem
Page 138 and 139:
argumentis a symbolic name, startin
Page 140 and 141:
Syntax Derived Type DefinitionTYPE
Page 142 and 143:
BYTE num_itemsBYTE items(12)END MAP
Page 144 and 145:
ExamplesINTEGER SCORE(30)CHARACTER
Page 146 and 147:
eal sumsum = 4h()accept sumand is r
Page 148 and 149:
specified with the ":" character ra
Page 150 and 151:
For example:SUBROUTINE YSUM1(M,B,C)
Page 152 and 153:
4.5 CM Fortran Extensions4.5.1 The
Page 154 and 155:
same manner. Direct access files ar
Page 156 and 157:
Table 5-1: OPEN SpecifiersSpecifier
Page 158 and 159:
After data is transferred, the file
Page 160 and 161:
• Repeatable editor commands whic
Page 162 and 163:
On output, the B field descriptor t
Page 164 and 165:
5.5.2.8 G Format ControlThe G forma
Page 166 and 167:
5.5.2.14 O Format Control Octal Val
Page 168 and 169:
The X control specifies a number of
Page 170 and 171:
5.7 List-directed formattingList-di
Page 172 and 173:
Data TypeINTEGER*4INTEGER*8LOGICAL*
Page 174 and 175:
• The value may be constants as a
Page 176 and 177:
Table 6-1: Numeric FunctionsGeneric
Page 178 and 179:
GenericNameIZEXTPurposeZero-ExtendF
Page 180 and 181:
GenericNameREALPurposeConvert toREA
Page 182 and 183:
GenericNamePurposeNumberof ArgsSIN
Page 184 and 185:
GenericNameIANDPurposeLogicalANDNum
Page 186 and 187:
Table 6-5: Fortran 90/95 Bit Manipu
Page 188 and 189:
Table 6-8: Fortran 90/95 Array Redu
Page 190 and 191:
Table 6-10: Fortran 90/95 Array Con
Page 192 and 193:
Generic Name Purpose Numberof ArgsP
Page 194 and 195:
Table 6-17: Miscellaneous Functions
Page 196 and 197:
ArgumentsThe argument STR is the st
Page 198 and 199:
SynopsisALLOCATED(ARRAY)ArgumentThe
Page 200 and 201:
SynopsisASIND(X)ArgumentThe argumen
Page 202 and 203:
ArgumentThe argument X must be of t
Page 204 and 205: Return ValueReturns a complex numbe
Page 206 and 207: COUNT 90Return the number of true e
Page 208 and 209: VALUES(6)VALUES(7)VALUES(8)holds th
Page 210 and 211: Return ValueThe dot product. For VE
Page 212 and 213: EXPONENT 90Return the exponent part
Page 214 and 215: SynopsisIAND(I, J)ArgumentsThe argu
Page 216 and 217: ArgumentThe arguments I and J must
Page 218 and 219: INT8 § 77Converts a real value to
Page 220 and 221: JINT § 77Converts a value to an in
Page 222 and 223: LEN 90Returns the length of the sup
Page 224 and 225: LLT 90Test the supplied strings to
Page 226 and 227: LSHIFT § 77Perform a logical shift
Page 228 and 229: If the MASK parameter is present, t
Page 230 and 231: MINLOC 90Return the position of the
Page 232 and 233: MVBITS 90Copies a bit sequence from
Page 234 and 235: SynopsisNULL([PTR])ArgumentsThe opt
Page 236 and 237: Return ValueThe return value is the
Page 238 and 239: SynopsisREAL(A [,KIND])ArgumentsThe
Page 240 and 241: ArgumentsThe argument X is of type
Page 242 and 243: Return ValueThe result is an array
Page 244 and 245: SIZE 90Returns either the total num
Page 246 and 247: Return ValueThe return value is the
Page 248 and 249: TRANSFER 90Return a value that has
Page 250 and 251: VERIFY 90Verify that a character st
Page 252 and 253: IntrinsicIALL_SUFFIXIANYIANY_PREFIX
Page 256 and 257: getloghostnmlstatputenvsymlnkttynam
Page 258 and 259: esyndbesj0dbesj1dbesjndbesy0dbesy1d
Page 260 and 261: Descriptionctime converts a system
Page 262 and 263: fgetcGet character from a logical u
Page 264 and 265: Synopsisinteger function fseek(lu,
Page 266 and 267: Synopsisinteger function getc(ch)ch
Page 268 and 269: Synopsisinteger function getuid()De
Page 270 and 271: isattyIs logical unit a tty.Synopsi
Page 272 and 273: DescriptionReturn the value which i
Page 274 and 275: perrorPrint error message.Synopsiss
Page 276 and 277: DescriptionThe functions rand and i
Page 278 and 279: DescriptionReturn the index of the
Page 280 and 281: except lstat returns information ab
Page 282 and 283: ttynamGet name of a terminalSynopsi
Page 284 and 285: 7.2.2 VAX/VMS System SubroutinesDAT
Page 286 and 287: destis an integer variable or array
Page 289 and 290: 8 OpenMP Directives for FortranThe
Page 291 and 292: the parallel region redundantly. Th
Page 293 and 294: In the presence of an IF clause, th
Page 295 and 296: !$OMP SINGLE [Clauses]< Fortran cod
Page 297 and 298: By default, there is an implicit ba
Page 299 and 300: appear within a parallel region. It
Page 301 and 302: [!$OMP SECTION]< Fortran code block
Page 303 and 304: directive. When a common block that
Page 305 and 306:
subroutine omp_unset_lock(integer_v
Page 307 and 308:
9 HPF DirectivesHPF directives are
Page 309 and 310:
ALIGN - REALIGNThe ALIGN directive
Page 311 and 312:
See AlsoThe TEMPLATE and PROCESSORS
Page 313 and 314:
Example!HPF$!HPF$!HPF$!HPF$REAL A(1
Page 315 and 316:
See AlsoFor details on the PROCESSO
Page 317:
TypeSpecificationSee AlsoFor detail
Page 320 and 321:
IntrinsicGLOBAL_TO_LOCALGLOBAL_UBOU
Page 322 and 323:
Return ValueIf the actual argument
Page 324 and 325:
ArgumentsARRAY may be of any type;
Page 326 and 327:
Return TypeThe result is of type de
Page 328 and 329:
ArgumentsOptional argument. PROC.AR
Page 331 and 332:
IndexABSTRACT_TO_PHYSICAL..........
Page 333 and 334:
DATA ..............................
Page 335 and 336:
GETLOG ............................
Page 337 and 338:
EXP ...............................
Page 339 and 340:
F specifier........................
Page 341 and 342:
LOCAL_UNIDEX.......................
Page 343 and 344:
OpenMP Fortran Directives .........
Page 345 and 346:
DOWHILE ...........................
Page 347:
FMT specifier......................
show all

PGI Fortranï - Servidor WWW del Cluster Ladon-Hidra

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

PGI Fortranï - Servidor WWW del Cluster Ladon-Hidra