mazda-om-release2-029 1..372 ++ - Mazda Canada

Driving Your MazdaStarting and DrivingNOTEIf turning the key is difficult, jiggle thesteering wheel from side to side.ACC (Accessory)The steering wheel unlocks and someelectrical accessories will operate.ONThis is the normal running position afterthe engine is started. The warning lights(except brakes) should be inspectedbefore the engine is started (page 5-33).NOTEWhen the ignition switch is turned tothe ON position, the sound of the fuelpump motor operating near the fueltank can be heard. This does notindicate an abnormality.STARTThe engine is started in this position. Itwill crank until you release the key; thenit returns to the ON position. The brakewarning light can be checked after theengine is started (page 5-33).qIgnition Key ReminderIf the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.NOTEStarting the EngineEngine-starting is controlled by thespark ignition system.This system meets all CanadianInterference-Causing EquipmentStandard requirements regulating theimpulse electrical field strength of radionoise.1. Occupants should fasten their seatbelts.2. Make sure the parking brake is on.3. Depress the brake pedal.4. (Manual transaxle)Depress the clutch pedal all the wayand shift into neutral.Keep the clutch pedal depressed whilecranking the engine.(Automatic transaxle)Put the vehicle in park (P). If you mustrestart the engine while the vehicle ismoving, shift into neutral (N).NOTE(Manual transaxle)The starter will not operate if the clutchpedal is not depressed all the way.(Automatic transaxle)The starter will not operate if the shiftlever is not in P or N.5. Turn the ignition switch to the STARTposition and hold (up to 10 seconds ata time) until the engine starts.5-3