12.07.2015 Views

mazda-om-release2-029 1..372 ++ - Mazda Canada

mazda-om-release2-029 1..372 ++ - Mazda Canada

mazda-om-release2-029 1..372 ++ - Mazda Canada

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

In Case of an EmergencyFlat TireqLocking Lug Nuts íIf your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling out the cardprovided in the glove box and mailing itin the acc<strong>om</strong>panying envelope. If you losethis key, consult an Authorized <strong>Mazda</strong>Dealer or use the lock manufacturer'sorder form, which is with the registrationcard.To install the nut1. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.2. Place the lug wrench on top of the key,apply pressure, and turn it clockwise.qMounting the Spare Tire1. Remove dirt and grime fr<strong>om</strong> themounting surfaces of the wheel andhub, including the hub bolts, with acloth.Antitheft lug nutSpecial keyTo remove an antitheft lug nut1. Obtain the key for the antitheft lug nut.2. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.3. Place the lug wrench on top of the keyand apply pressure. Turn the wrenchcounterclockwise.WARNINGRemoving Dirt and Grime fr<strong>om</strong>Wheels, Hubs and Hub Bolts:When changing or replacing a tire,not removing dirt and grime fr<strong>om</strong> themounting surfaces of the wheel, huband hub bolts is dangerous. The lugnuts could loosen while driving andcause the tire to c<strong>om</strong>e off, resulting inan accident. Make sure the mountingsurfaces of the wheel, hub and lugnuts are clean before changing orreplacing tires.í S<strong>om</strong>e models.7-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!