mazda-om-release2-029 1..372 ++ - Mazda Canada

Essential Safety EquipmentSRS Air BagsqHow the Front Air Bags WorkHow the Air Bags WorkWhen air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly deflate.The front air bags will function only once. After that, the front air bags will not workagain and must be replaced.Only an Authorized Mazda Dealer can replace the system components.The front, dual stage air bags control air bag inflation in two energy stages. During animpact of moderate severity the front air bags deploy with lesser energy, whereas duringmore severe impacts, they deploy with more energy. Deployment of the front air bags maydiffer between the driver and the front passenger depending on the driver seat position,front passenger weight and front seat belt usage, which allow for further controlling of thesystem.The front air bags will deploy onlyin a frontal or frontal offset impact.Driver seat slide position sensorYour vehicle is equipped with a driver seat slide sensor as a part of the supplementalrestraint system. The sensor is located under the driver seat. The sensor determines whetherthe driver seat is fore or aft of a reference position and sends the seat position to the crashsensors and diagnostic module (SAS unit). The sensor is also designed to control thedeployment of the driver air bag depending on how close the driver seat is to the steeringwheel.The air bag/front seat belt pretensioner system warning light flashes if the sensor has apossible malfunction (page 2-53).2-45