mazda-om-release2-029 1..372 ++ - Mazda Canada

Maintenance and CareOwner MaintenanceHigh-beam bulb1. Turn the socket and bulb assemblycounterclockwise and remove it.Carefully remove the headlight bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.2. Disconnect the bulb from the electricalconnector by pressing the tab on theconnector with your finger and pullingthe bulb upward.Low-beam bulb(Xenon fusion bulb)You cannot replace the low beam bulbs byyourself.The bulbs must be replaced at anAuthorized Mazda Dealer.(Halogen bulbs)1. Detach the electrical connector fromthe bulb by pulling it to the rear.2. Pull off the sealing cover.3. Install the new bulb in the reverse orderof removal.3. Unhook the bulb retaining spring.NOTElllTo replace the bulb, contact anAuthorized Mazda Dealer.If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.4. Swing the retaining spring out andaway to free the headlight bulb.5. Carefully remove the headlight bulbfrom the socket by pulling it straightback.8-44