mazda-om-release2-029 1..372 ++ - Mazda Canada

Driving Your MazdaSwitches and ControlslCAUTIONDo not shade the light sensor byadhering a sticker or a label on thewindshield. Otherwise the lightsensor will not operate correctly.Light sensorNOTEllWhen the headlight switch is in theAUTO position and the ignitionswitch is turned to the ACC orLOCK position, the headlights, otherexterior lights and dashboardillumination will turn off.The timing for turning on theheadlights, other exterior lights anddashboard illumination can bedelayed by adjusting the sensitivityof the light sensor. Consult anAuthorized Mazda Dealer regardingsensor adjustment.lThe light sensor also works as a rainsensor for the auto-wiper control.When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically. Becareful not to pinch hands or fingersas it may cause injury, or damage thewipers (page 5-50).Xenon fusion headlight bulbs íThe low-beam bulbs of the headlightshave xenon fusion bulbs that produce abright white beam over a wide area.WARNINGXenon Fusion Bulb Replacement:Replacing the xenon fusion bulbs byyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Do not replace the xenonfusion bulbs by yourself. Consult anAuthorized Mazda Dealer when thereplacement is necessary.NOTEIf the headlights flash, or the brightnessweakens, the bulb-life may be depletedand a replacement is necessary. Consultan Authorized Mazda Dealer.í Some models.5-47