mazda-om-release2-029 1..372 ++ - Mazda Canada

Interior ComfortInterior EquipmentqClockNOTEWhen the trip computer is beingdisplayed, press the CLOCK button tochange the display to the time.When the ignition switch is in the ACC orON position, the time is displayed.3. “Hr. ADJUST” will be displayed next,and the hour portion of the display willflash. Press the SET button to set thehour, then press the CLOCK button.4. “Min. ADJUST” will be displayednext, and the minutes portion of thedisplay will flash. Press the SET buttonto set the minutes, then press theCLOCK button.Time resettingNOTEFor trip computer-equipped vehicles,press the INFO button instead of theSET button when resetting the time.Time settingNOTEFor trip computer-equipped vehicles,press the INFO button instead of theSET button when setting the time.1. Press the CLOCK button until a beepsounds, and “12Hr” and “24Hr” will bedisplayed.2. Press the SET button to switch between“12Hr” and “24Hr” displays. Theselected display will flash.To select the desired clock setting,press the CLOCK button again whilethe preferred setting is flashing.While the clock is displayed, press theSET button 1.5 seconds or more. Whenthe button is released, a beep will soundand the clock will be reset as follows:(Example)12:01―12:29→12:0012:30―12:59→1:00NOTEWhen the SET button is released, theseconds are reset to “00”.qAmbient Temperature Display íWith manual type air conditionerWhen the ignition switch is in the ONposition, the ambient temperature isdisplayed.6-46í Some models.