mazda-om-release2-029 1..372 ++ - Mazda Canada

Maintenance and CareOwner Maintenance6. Replace the bulb.7. Install the new bulb in the reverse orderof removal.3. Disconnect the bulb from the electricalconnector by pressing the tab on theconnector with your finger and pullingthe bulb upward.NOTEllllTo replace the bulb, contact anAuthorized Mazda Dealer.If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.When reinstalling the sealing cover,make sure faces up.Replacing a fog light bulb í1. Turn the screw counterclockwise andremove it and partially peel back themudguard.2. Turn the socket and bulb assemblycounterclockwise and remove it.Carefully remove the fog light bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.4. Install the new bulb in the reverse orderof removal.NOTElllTo replace the bulb, contact anAuthorized Mazda Dealer.If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.Front turn signal lights/Side-markerlightsDue to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda Dealer.Side turn signal lights1. Slide the unit as shown in the figure toremove it.í Some models.8-45