CAAPE User's Manual - ALSTOM Signaling Inc.

Using CAAPE Graphics6.8.2. Creating a SystemIn the Project View of the Project Workspace, create the desired system folders andhardware systems. System folders are just containers for organizing hardware systems.A hardware system represents an actual hardware installation at a customer location.Right click on the top-level project icon or name and select Add System to Projectfrom its popup menu.When you request to create a hardware system, the System Wizard is displayed toguide you through the steps of creating the system. You do not have to perform all thesteps available in the Wizard; if you just click Next to go through all the screens andfinally click Finish, the system is created and you can go back later and enter its data.However, the System Wizard provides more guidance than you get through the normalsystem editing process. To make the best use of the System Wizard, create a hardwarecomponent and assign its boards before creating the hardware system that uses it.In the System Documentation page, descriptive data is entered for the system.Figure 6–23. System Wizard - System DocumentationP2512A, Rev. Oct/09 6–41 Alstom Signaling Inc.