CAAPE User's Manual - ALSTOM Signaling Inc.

Using Application FilesAvailable run controls depend on the application type. General run controls are used toselect compiler revision and general options.Table 7–1. General Run ControlsRun ControlDescriptionUse Run Controls Record When this option is selected the Run Controls listed inthe source file is used.CompileThe logic in the source file is compiled.Generate PROM File Upon the Successful completion of a compile the PROMfile is generated.Generate Tracker Information Generates the information necessary for the TRACKERprogram to run.Generate GraphSimInformationInclude in MMS FileListing ReportsCompiler revisionGenerate simulation data file used by the GraphicalSimulator.Include data for this application when the MMS data fileis generated.Determines which reports are generated upon acompile.Selects the CAA revision to use when compiling thisapplication, running ADV, etc.VPI run controls are used to set compiler options for VPI or VSP applications only.Table 7–2. VPI Run ControlsRun ControlGenerate ADV informationAutomatically run ADV onsuccessful compileI/O Label InformationDescriptionGenerates the information necessary to run the ADVapplication.If Generate ADV information is selected this optionruns the ADV upon a successful compile.The Generate option allows the LBL file to be createdin a compile. The Target Device selects what type oflabel file is created from the LBL file. For VPI CAApackages that support this feature, the LabelComments button displays a Label Annotations dialogfor creating or editing a file that specifies usercomment text to be added to the I/O label the nexttime it is generated.P2512A, Rev. Oct/09 7–16 Alstom Signaling Inc.