CAAPE User's Manual - ALSTOM Signaling Inc.

More documents

Recommendations

Info

Using Application Files7.10.6. Graphical Logic VerificationThe ADV verifies that the output prom data correctly reproduces what was entered inthe text files. If the Vital logic in the text files was created from a graphical logiccomponent, two additional items must be verified:1. Verify that the conversion from graphical logic component to text did not change theequation data.2. Verify that the graphical logic data saved is the same as what the user entered, i.e.that the logic editor does not save something different from what it displays.In CAAPE version 005C and later, a check is made to verify that the graphical ladderlogic was correctly converted to text before compiling. When the ADV is started, anindependent program reads the logic text files and converts them back into ladder logicformat. This data is compared to the contents of the original logic component, and theresults are passed to the ADV to be included in its consolidation report.In CAAPE version 005F and later, it is possible to generate a graphical printout of thelogic directly from the text files using a diverse, independent facility. By looking at thisindependent printout, one can verify that the logic that was created is the intended logicand thus satisfy item 2.See Printing Logic Graphically for details.7.10.7. Note on Sum-of-Products FormatThis is an expanded format compatible with VPI or VSP Vital software. Lists of AND'edvariables are OR'ed together; in relay terms, each Boolean equation consists only of aset of simple parallel branches. In the example below, '*' is an AND operation and '+' isan OR operation.Example in original format:BOOL X = ( (A+B) * (C+D) )Example in equivalent sum-of-products format:BOOL X = ( A*C + A*D + B*C + B*D )P2512A, Rev. Oct/09 7–30 Alstom Signaling Inc.
Using Application Files7.11. PROGRAMMING MEMORY DEVICES7.11.1. EPROM FilesThese files contain the data to be programmed into the memory devices on the variousboards in the system. They are listed in CAAPE’s File View. File extensions depend onboard type:iVPI VSPiVPI VSP Main ApplicationFiles: application-name.HEX, application-name.U40, application-name.U41Created by: .HEX created by compiler, .Uxx created by SplitUsage: .HEX for download, .Uxx for EPROM programmingiVPI VSP Main SystemFiles: system-software-name.HEX, system-software-name.U42, system-softwarename.U43Created by: .HEX copied from installed iVPI CAA, .Uxx created by SplitUsage: .HEX for download, .Uxx for EPROM programmingiVPI VSP Comm ApplicationFiles: application-name.HEX, application-name.U8, application-name.U9. Applicationname is main application name plus “CP”.Created by: .HEX and .UXX created by compilerUsage: .HEX for download, .Uxx for EPROM programmingiVPI NVSPNVSP Main Application / SystemFiles: application-name.NVE, application-name.U53, application-name.U60Created by: .NVE and .UXX created by compilerUsage: .NVE for download, .Uxx for EPROM programmingNVSP CommP2512A, Rev. Oct/09 7–31 Alstom Signaling Inc.
Page 3:
Computer-AidedApplicationProgrammin
Page 11 and 12:
MANUAL SPECIAL NOTATIONSIn the Alst
Page 13 and 14:
TopicTABLE OF CONTENTSPage1. SECTIO
Page 15 and 16:
TopicTABLE OF CONTENTS (CONT.)Page6
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
TitleLIST OF FIGURESPageFigure 7-1.
Page 25 and 26:
General1. SECTION 1 - GENERALThis m
Page 27 and 28:
General1.5. COMMON ABBREVIATIONSAbb
Page 29:
GeneralSee Section 11, CAAPE File S
Page 32 and 33:
Introduction2.2.2. System Software
Page 34 and 35:
Introduction2.2.5. CAA VersionsCert
Page 36 and 37:
IntroductionTHIS PAGE INTENTIONALLY
Page 38 and 39:
Getting Started3.2.2. Installation
Page 40 and 41:
Getting StartedThe toolbar is locat
Page 42 and 43:
Getting Started3.6. SETTING USER PR
Page 44 and 45:
Getting StartedTHIS PAGE INTENTIONA
Page 46 and 47:
CAAPE Projects4.1.3. Project Data E
Page 48 and 49:
CAAPE ProjectsThe Component View di
Page 50 and 51:
CAAPE ProjectsProject View, Compone
Page 52 and 53:
CAAPE ProjectsFigure 4-6. Project D
Page 54 and 55:
CAAPE Projects4.5. SETTING PROJECT
Page 56 and 57:
CAAPE ProjectsTHIS PAGE INTENTIONAL
Page 58 and 59:
General Rules and Techniques5.2.2.
Page 60 and 61:
General Rules and Techniques5.4. US
Page 62 and 63:
Using CAAPE GraphicsOnce the applic
Page 64 and 65:
Using CAAPE GraphicsThe available c
Page 66 and 67:
Using CAAPE Graphics6.3. EDITING HA
Page 68 and 69:
Using CAAPE GraphicsFigure 6-4. New
Page 70 and 71:
Using CAAPE Graphics6.3.3. Setting
Page 72 and 73:
Using CAAPE GraphicsFigure 6-8. Sam
Page 74 and 75:
Using CAAPE Graphics6.3.7. Opening
Page 76 and 77:
Using CAAPE GraphicsNon-Vital Seria
Page 78 and 79:
Using CAAPE Graphics6.5. EDITING LO
Page 80 and 81:
Using CAAPE GraphicsEquation parame
Page 82 and 83:
Using CAAPE Graphics6.5.3.2. Using
Page 84 and 85:
Using CAAPE Graphics6.5.3.5. Using
Page 86 and 87:
Using CAAPE Graphics6.5.4. Insertin
Page 88 and 89:
Using CAAPE Graphics6.5.5. Editing
Page 90 and 91:
Using CAAPE Graphics6.5.6.7. Transf
Page 92 and 93:
Using CAAPE Graphics6.5.6.10.3. Com
Page 94 and 95:
Using CAAPE GraphicsFigure 6-17. Lo
Page 96 and 97:
Using CAAPE Graphics6.5.12. Cut & P
Page 98 and 99: Using CAAPE Graphics6.7. USING THE
Page 100 and 101: Using CAAPE Graphics6.8. CREATING A
Page 102 and 103: Using CAAPE GraphicsEnter the descr
Page 104 and 105: Using CAAPE GraphicsFigure 6-26. Sy
Page 106 and 107: Using CAAPE Graphics− VSC boards
Page 108 and 109: Using CAAPE GraphicsIn the Serial M
Page 110 and 111: Using CAAPE Graphics6.8.5. Saving a
Page 112 and 113: Using CAAPE GraphicsFigure 6-31. Me
Page 114 and 115: Using CAAPE GraphicsTo build applic
Page 116 and 117: Using CAAPE Graphics6.10. IMPORTING
Page 118 and 119: Using CAAPE Graphics6.10.5. Creatin
Page 120 and 121: Using Application FilesThere can al
Page 122 and 123: Using Application Files7.4.1. Appli
Page 124 and 125: Using Application FilesFigure 7-2.
Page 126 and 127: Using Application Files7.5. EDITING
Page 128 and 129: Using Application Files7.6.1. Creat
Page 130 and 131: Using Application FilesWhen adding
Page 132 and 133: Using Application Files7.7. SETTING
Page 134 and 135: Using Application FilesAvailable ru
Page 136 and 137: Using Application Files7.8. COMPILI
Page 138 and 139: Using Application Files7.8.2. VPI2,
Page 140 and 141: Using Application Files7.8.3. VPI2,
Page 142 and 143: Using Application Files7.8.4.1. EPR
Page 144 and 145: Using Application Files7.9. SIMULAT
Page 146 and 147: Using Application Files7.10.2. Veri
Page 150 and 151: Using Application FilesFiles: syste
Page 152 and 153: Using Application FilesVPI VSCVital
Page 154 and 155: Using Application FilesCenTraCode I
Page 156 and 157: Using Application Files7.13. PRINTI
Page 158 and 159: Using Application Files7.13.3.2. Pr
Page 160 and 161: Using Application FilesUse the Page
Page 162 and 163: Using Application Files7.13.4. Rela
Page 164 and 165: Configuration Control8.2.2. Running
Page 166 and 167: Configuration Control9.2.2. Configu
Page 168 and 169: Configuration Control9.2.4. Compile
Page 170 and 171: Configuration ControlIndividual CAA
Page 172 and 173: Using the Graphical Simulator10.1.2
Page 174 and 175: Using the Graphical Simulator10.5.
Page 186 and 187: Using the Graphical SimulatorUse th
Page 188 and 189: Using the Graphical SimulatorUse th
Page 190 and 191: Using the Graphical SimulatorNOTETh
Page 198 and 199:
Using the Graphical Simulator10.9.3
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Using the Graphical Simulator10.10.
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Using the Graphical SimulatorTHIS P
Page 230 and 231:
CAAPE File Infrastructure11.3. CAA
Page 232 and 233:
CAAPE File InfrastructureApplicatio
Page 234 and 235:
CAAPE File InfrastructureTable 11-6
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
CAAPE File InfrastructureTHIS PAGE
Page 244 and 245:
Simulator Reference12.2. APPLICATIO
Page 246 and 247:
Simulator Reference12.2.4. Symbol T
Page 248 and 249:
Simulator ReferenceFor example (use
Page 250 and 251:
Simulator Reference12.2.7. Hardware
Page 252 and 253:
Simulator Reference12.2.7.3. Switch
Page 254 and 255:
Simulator Reference12.2.7.4.1. Prot
Page 256 and 257:
Simulator ReferenceFor example:1 2
Page 258 and 259:
Simulator ReferenceTable 12-2. Mess
Page 260 and 261:
Simulator Reference12.3. SIMULATION
Page 262 and 263:
Simulator Reference}ELSE{}{BOOL VAR
Page 264 and 265:
Simulator Reference12.4.2. Non-Vita
Page 266 and 267:
Simulator ReferenceFunction: SET_NV
Page 268 and 269:
Simulator ReferenceFunction: SET_NV
Page 270 and 271:
Simulator Reference12.5. PROTOCOL D
Page 272 and 273:
Simulator ReferenceON_NVSER_RECEIVE
Page 274 and 275:
Simulator ReferenceON_NVTWC_RECEIVE
Page 276 and 277:
Simulator Reference12.6. SCRIPT FIL
Page 278 and 279:
Simulator Reference12.6.4. Alphabet
Page 280 and 281:
Simulator ReferenceBRKSets a breakp
Page 282 and 283:
Simulator ReferenceCYCExecute the a
Page 284 and 285:
Simulator ReferenceFLIPReverses the
Page 286 and 287:
Simulator ReferenceLOAD / NLOADSets
Page 288 and 289:
Simulator ReferenceMAXSet the maxim
Page 290 and 291:
Simulator ReferencePAUSECauses the
Page 292 and 293:
Simulator ReferenceRESETResets cert
Page 294 and 295:
Simulator ReferenceSETSets the valu
Page 296 and 297:
Simulator ReferenceSIMExecute the a
Page 298 and 299:
Simulator ReferenceTRACESets condit
Page 300 and 301:
Simulator Reference12.6.5. Command
Page 302 and 303:
Simulator ReferenceTable 12-4. Appl
Page 304:
Simulator Reference12.6.7. Special
show all

CAAPE User's Manual - ALSTOM Signaling Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?