CAAPE User's Manual - ALSTOM Signaling Inc.

Using Application Files7.8.4. CTC2v, CTC2s, NVSP, CSEX4 ApplicationsInputs include:• Application source files (.CSI, .HDW, …) created by the user.• System software, protocol, data logging and other software modules depending onuser selections in the source files. From the CAAPE’s CTCFILES directory.• LPC files: for serial port and TWC / NVTWC configuration. Created by the user ordefaults from CTCFILES.Output folder files include:• Application data structures (.CSE): created if the Generate PROM file run control isselected. They are split into individual high/low address EPROM files forprogramming memory devices.• Graphical Simulator data file (.SMN): created if the Generate GraphSim Informationrun control is selected. Read by the Graphical Simulator to simulate the application.Report folder files include:• Compiler report (.LCS): depending on run controls, may include listings of theapplication logic, information on hardware module wiring, lists of variables and theirusages, etc.• Configuration report (.CFN): may include versions of graphical components used tocreate the text source files, dates and times of input and output files, etc. Updatedwhen EPROM files are created to include high / low address file checksums andCRCs.• Tracker file (.CAQ): created if the Generate Tracker Information run control isselected. Used by the Tracker program.P2512A, Rev. Oct/09 7–23 Alstom Signaling Inc.