CAAPE User's Manual - ALSTOM Signaling Inc.

Using CAAPE Graphics6.9. MAKE FILES AND BUILDWhen all components have been edited and linked together in a system, the system canbe built. Building a system is the process of creating application data from the graphicalcomponents. The graphical data is converted into textual input files and the compilersare run to generate output and report files. Application folders containing these files arecreated in the File View of the Project Workspace. Application file names correspond tothe Build Names of the Vital and non-vital processor boards (see below).Table 6–2 shows the relationship between the graphical items in the Project View andthe corresponding items placed in the File View after a Build.Table 6–2. Project View vs. File View Contents After BuildGraphics (Project View)System FolderVPI SystemCPU/PD hardware boardCPU II hardware board, build MainCPU II hardware board, build CommCSEX1, CSEX2, CSEX3 hardware boardCSEX4 hardware boardiVPI GTP boardWIU SystemWIU VSP hardware board, build MainWIU VSP hardware board, build CommWIU NVSP hardware boardiVPI SystemiVPI VSP hardware board, build MainiVPI VSP hardware board, build CommiVPI NVSP hardware boardCenTraCode II-s SystemCenTraCode II-s CPU boardFile ViewSystem folderVPI system folderVPI application folder and filesVPI2 Main application folder and filesVPI2 Comm application folder and filesCTC2v application folder and filesCSEX4 application folder and filesiVPI GTP application folder and filesWIU system folderWIU VSP Main application folder and filesWIU VSP Comm application folder andfilesWIU NVSP application folder and filesiVPI system folderiVPI VSP Main application folder and filesiVPI VSP Comm application folder andfilesiVPI NVSP application folder and filesCTC2s system folderCTC2s application folder and filesTo build a system, right click on the system in the Project View and select Build fromits popup menu.P2512A, Rev. Oct/09 6–53 Alstom Signaling Inc.