CAAPE User's Manual - ALSTOM Signaling Inc.

Using CAAPE Graphics6.5.3.9. Using Drag and DropSelected logic data can be dragged and dropped from one logic view into the same or adifferent one. First select the data, then press the left mouse button over one of theselected items. Drag the mouse to the desired location and release the mouse button. Ifthe Ctrl key is held down, the data is copied to the new location; otherwise the data ismoved there.As with Paste, the drop location must be a valid target for the type of data beingtransferred. The mouse cursor changes to indicate when the mouse is over a valid droplocation.Moving data through Drag and Drop constitutes two independent steps: an insertion intothe target area followed by a deletion from the source area. Two Undo steps arerequired for such an operation: undo the deletion from the source, then undo theinsertion into the target.6.5.3.10. Changing the Appearance of the Logic Editing ScreenBoolean equations can be displayed in ladder logic, straight line or drop line format. Goto Configure | Symbols in the main menu and select the desired format.Change the display font by going to Configure | Font in the main menu.Change the colors of certain statement types by going to Options | User Preferencesin the main menu and setting the appropriate Colors options.The editing window can be zoomed in or out by going to View | Zoom in the mainmenu.Split the editing window by going to Windows | Split Horizontal or Windows | SplitVertical in the main menu. The two split windows can be scrolled independently forease in comparing sections of logic or copying data between sections.P2512A, Rev. Oct/09 6–25 Alstom Signaling Inc.