CAAPE User's Manual - ALSTOM Signaling Inc.

Using Application Files7.13.3.3. Printing and Print PreviewGo to File | Print Preview to preview the print; go to File | Print to print.7.13.3.4. Logic Information FileThis file provides relay state information which is not contained in the main logic fileused by the compiler. If the logic file was created from graphics, this file is also createdautomatically. If the logic file did not come from graphics but you wish the logic printoutto reflect relay states, you can:• Manually create a Logic Information File: use Add File to Application to add a .VTIor .NVI file, then edit the file to set the states. The file consists of a LOGIC STATESECTION header followed by a list of relay states on one or more lines. The statefor relay “x” is specified by entering “x=T” for normally closed and “x=F” for normallyopen.• Import the logic file into a logic component, edit the component to set the desiredrelay states, then export the component back into text files. Since exporting thecomponent changes the format of the main logic text file, you probably want totemporarily save it somewhere else and then copy it back after the Logic InformationFile is created.P2512A, Rev. Oct/09 7–43 Alstom Signaling Inc.