CAAPE User's Manual - ALSTOM Signaling Inc.

Using Application Files7.8.3. VPI2, WIU VSP and iVPI VSP Comm Applications (Comm subsystem)Inputs include:• Application source files (.VCC, …) created by the user.• Comm system software from a shared directory in CAAPE.Output folder files include:• Application data structures / system software (.HEX): created if the Generate PROMfile run control is selected; can be downloaded to the board or can be split intoindividual high/low address EPROM files for programming application memorydevices.• High/low address EPROM files.Report folder files include:• Compiler report (.LCC): network information, etc.• Configuration report (.CFC): dates and times of input and output files, etc. Updatedwhen EPROM files are created to include high / low address file checksums andCRCs.7.8.3.1. EPROM FilesThe compile process produces application / system files to be used in programming thememory devices on the boards. Comm application and system files can be downloadedto the board or split into high / low address EPROM files for direct memory deviceprogramming.The individual EPROM files are created and shown in the application’s Output Folder.File checksums and CRCs are reported in the CAAPE’s Message Workspace andoutput to the configuration report (.CFC) file in the Report folder.See Programming Memory Devices for details.P2512A, Rev. Oct/09 7–22 Alstom Signaling Inc.